Category: 1018505-59-3

Application of 1018505-59-3 , The common heterocyclic compound, 1018505-59-3, name is 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine, molecular formula is C11H18N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

The 4 – (2 – chloro -3 – fluoro – pyrazine amino) -2 – pyrimidine formic acid (1.35 g 1.2 eq), 5 – (4 – ethyl – piperazine -1 – yl) – piperidine -2 – amino (0.81 g 1 eq) and triethylamine (500 mul) in DMF (15 ml) in, then added HBTU (1.51 g 1.5 eq). The mixture stirring at room temperature to 16 hours, then EtOAc (50 ml) and saturated NaHCO3Solution (15 ml), and for separating each layer of EtOAc (2 × 15 ml) extraction the aqueous layer, the combined organic layer dried (MgSO4), filtering and evaporation to dryness, the residue through the column chromatography purification, and to obtain white solid compound of 1.42 g (yield: 62%).

The synthetic route of 1018505-59-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Jiangxi Runze Pharmaceutical Co., Ltd.; Liao Niansheng; Zou Mingming; Hu Xiande; Sui Rongchun; Xu Man; (14 pag.)CN108689997; (2018); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 1018505-59-3 , The common heterocyclic compound, 1018505-59-3, name is 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine, molecular formula is C11H18N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

The 4 – (2 – chloro -3 – fluoro – pyrazine amino) -2 – pyrimidine formic acid (1.35 g 1.2 eq), 5 – (4 – ethyl – piperazine -1 – yl) – piperidine -2 – amino (0.81 g 1 eq) and triethylamine (500 mul) in DMF (15 ml) in, then added HBTU (1.51 g 1.5 eq). The mixture stirring at room temperature to 16 hours, then EtOAc (50 ml) and saturated NaHCO3Solution (15 ml), and for separating each layer of EtOAc (2 × 15 ml) extraction the aqueous layer, the combined organic layer dried (MgSO4), filtering and evaporation to dryness, the residue through the column chromatography purification, and to obtain white solid compound of 1.42 g (yield: 62%).

The synthetic route of 1018505-59-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Jiangxi Runze Pharmaceutical Co., Ltd.; Liao Niansheng; Zou Mingming; Hu Xiande; Sui Rongchun; Xu Man; (14 pag.)CN108689997; (2018); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1018505-59-3, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1018505-59-3, name is 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine, molecular formula is C11H18N4, molecular weight is 206.2874, as common compound, the synthetic route is as follows.

Preparation of 6-chloro-N-(5-(4-ethylpiperazin-1-yl)pyridin-2-yl)imidazo[1,2-a]pyridin-8-amine A mixture of impure 5-(4-ethylpiperazin-1-yl)pyridin-2-amine (1.00 g, 4.85 mmol assumed), 8-bromo-6-chloroimidazo[1,2-a]pyridine hydrochloride salt (1.30 g, 4.85 mmol), 2,2′-bis(diphenylphosphino)-1,1′-binaphthalene (634 mg, 1.02 mmol) and cesium carbonate (4.90 g, 15.0 mmol) in toluene (50 mL) was sparged with nitrogen while stirring for 10 min. Palladium(II) acetate (120 mg, 0.491 mmol) was then added and the reaction stirred at reflux for 18 h. After this time, the reaction was cooled to room temperature, diluted in a mixture of 1:1 methanol/methylene chloride (100 mL) and filtered through diatomaceous earth. The filtrate was concentrated under reduced pressure and the resulting residue purified by chromatography (silica, gradient, 1:19 methanol/methylene chloride to 1:6 methanol/methylene chloride) to afford 6-chloro-N-(5-(4-ethylpiperazin-1-yl)pyridin-2-yl)imidazo[1,2-a]pyridin-8-amine as a yellow-green solid: 1H NMR (400 MHz, DMSO-d6.) d 9.12 (s, 1H), 8.30 (d, J=2.0 Hz, 1H), 8.26 (d, J=2.0 Hz, 1H), 7.99 (d, J=2.8 Hz, 1H), 7.89 (d, J=0.8 Hz, 1H), 7.55 (d, J=0.8 Hz, 1H), 7.43 (dd, J=8.8, 2.8 Hz, 1H), 7.35 (d, J=8.8 Hz, 1H), 3.11-3.10 (m, 4H), 2.50-2.49 (m, 4H, merged with DMSO peak), 2.38-2.37 (m, 2H), 1.04 (t, J=7.2 Hz, 3H).

Statistics shows that 1018505-59-3 is playing an increasingly important role. we look forward to future research findings about 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine.

Reference:
Patent; Gilead Connecticut, Inc.; Blomgren, Peter A.; Currie, Kevin S.; Kropf, Jeffrey E.; Lee, Seung H.; Mitchell, Scott A.; Schmitt, Aaron C.; Xu, Jianjun; Zhao, Zhongdong; US2014/148430; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 1018505-59-3 ,Some common heterocyclic compound, 1018505-59-3, molecular formula is C11H18N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

4-(2-Dimethylcarbonyl-2-carbonyl-ethylamino)-2-pyrimidinecarboxylic acid (1.26 g, 1.2 eq),5-(4-Ethyl-piperazin-1-yl)-piperidin-2-amino (0.81 g, 1 eq)And triethylamine (500 muL) in DMF (15 mL),Then HBTU (1.51 g, 1.5 eq) was added. The mixture was stirred at room temperature for 16 hours.Then with EtOAc (50 mL)And saturated NaHCO3 solution(15 mL), the layers were separated and EtOAc EtOAcThe combined organic layers were dried (MgSO4), filtered and evaporated.The residue was purified by column chromatography.1.04 g of the title compound 6 was obtained as a white solid(yield: 47%),Its nuclear magnetic resonance spectrum data is as follows:

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1018505-59-3, 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Jiangxi Runze Pharmaceutical Co., Ltd.; Liao Niansheng; Hu Xiande; Zhou Liming; Sui Guilan; (22 pag.)CN109568256; (2019); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1018505-59-3 ,Some common heterocyclic compound, 1018505-59-3, molecular formula is C11H18N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 3-chloro-7-(3, 5-dimethoxyphenyl) isoqinoline (50 mg, 0.167 mmol) , 5-(4- ethylpiprazine-l-yl) pyridine-2-amine (38 mg , 0.183 mmol), X-Phos ( 8 mg, 10 mol% ) and cesium carbonate (108.4 mg, 0.334 mmol) in Toluene (4 mL) and t-BuOH (1 mL) (4: 1) argon was purged for 20 min. Then was added Pd(OAc)2 (3.76 mg, 10 mol%) again argon was purged for 5 min. The reaction mixture was heated at 120C for O/N. The reaction mixture was cooled to room temperature and filtered through celite pad and filtrate was concentrated under reduced pressure. Product was purified by column chromatography on silica gel column using DCM: MeOH: NH3 aq. (94:6: 1%) as an eluent to afford 7-(3,5-dimethoxyphenyl)-N-[5- (4-ethylpiperazin-l-yl)pyridin-2-yl]isoquinolin-3 -amine (20 mg) as a brown solid. 1H NMR (400 MHz, CDC13) delta 9.00 (s, 1H), 8.14 (s, 1H), 8.06 (d, J = 2.5 Hz, 1H), 8.00 (s, 1H), 7.79 (dd, J = 19.3, 8.6 Hz, 2H), 7.42 (s, 1H), 7.31 (dd, J = 8.9, 2.7 Hz, 1H), 7.10 (d, J = 8.9 Hz, 1H), 6.83 (d, J = 1.9 Hz, 2H), 6.49 (s, 1H), 3.88 (s, 6H), 3.25 – 3.14 (m, 4H), 2.66 (d, J = 4.4 Hz, 4H), 2.50 (q, J = 7.1 Hz, 2H), 1.15 (t, J = 7.2 Hz, 3H).M/Z: 469.58, M+l : 470.4, tR= 2.1 min. (System 2)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1018505-59-3, its application will become more common.

Reference:
Patent; EVOTEC (UK) LTD.; MC CARTHY, Clive; MILLS, Matthew; WO2014/44846; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1018505-59-3, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1018505-59-3, name is 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine, molecular formula is C11H18N4, molecular weight is 206.2874, as common compound, the synthetic route is as follows.

Preparation of 6-chloro-N-(5-(4-ethylpiperazin-1-yl)pyridin-2-yl)imidazo[1,2-a]pyridin-8-amine A mixture of impure 5-(4-ethylpiperazin-1-yl)pyridin-2-amine (1.00 g, 4.85 mmol assumed), 8-bromo-6-chloroimidazo[1,2-a]pyridine hydrochloride salt (1.30 g, 4.85 mmol), 2,2′-bis(diphenylphosphino)-1,1′-binaphthalene (634 mg, 1.02 mmol) and cesium carbonate (4.90 g, 15.0 mmol) in toluene (50 mL) was sparged with nitrogen while stirring for 10 min. Palladium(II) acetate (120 mg, 0.491 mmol) was then added and the reaction stirred at reflux for 18 h. After this time, the reaction was cooled to room temperature, diluted in a mixture of 1:1 methanol/methylene chloride (100 mL) and filtered through diatomaceous earth. The filtrate was concentrated under reduced pressure and the resulting residue purified by chromatography (silica, gradient, 1:19 methanol/methylene chloride to 1:6 methanol/methylene chloride) to afford 6-chloro-N-(5-(4-ethylpiperazin-1-yl)pyridin-2-yl)imidazo[1,2-a]pyridin-8-amine as a yellow-green solid: 1H NMR (400 MHz, DMSO-d6.) d 9.12 (s, 1H), 8.30 (d, J=2.0 Hz, 1H), 8.26 (d, J=2.0 Hz, 1H), 7.99 (d, J=2.8 Hz, 1H), 7.89 (d, J=0.8 Hz, 1H), 7.55 (d, J=0.8 Hz, 1H), 7.43 (dd, J=8.8, 2.8 Hz, 1H), 7.35 (d, J=8.8 Hz, 1H), 3.11-3.10 (m, 4H), 2.50-2.49 (m, 4H, merged with DMSO peak), 2.38-2.37 (m, 2H), 1.04 (t, J=7.2 Hz, 3H).

Statistics shows that 1018505-59-3 is playing an increasingly important role. we look forward to future research findings about 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine.

Reference:
Patent; Gilead Connecticut, Inc.; Blomgren, Peter A.; Currie, Kevin S.; Kropf, Jeffrey E.; Lee, Seung H.; Mitchell, Scott A.; Schmitt, Aaron C.; Xu, Jianjun; Zhao, Zhongdong; US2014/148430; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 1018505-59-3 ,Some common heterocyclic compound, 1018505-59-3, molecular formula is C11H18N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

4-(2-Dimethylcarbonyl-2-carbonyl-ethylamino)-2-pyrimidinecarboxylic acid (1.26 g, 1.2 eq),5-(4-Ethyl-piperazin-1-yl)-piperidin-2-amino (0.81 g, 1 eq)And triethylamine (500 muL) in DMF (15 mL),Then HBTU (1.51 g, 1.5 eq) was added. The mixture was stirred at room temperature for 16 hours.Then with EtOAc (50 mL)And saturated NaHCO3 solution(15 mL), the layers were separated and EtOAc EtOAcThe combined organic layers were dried (MgSO4), filtered and evaporated.The residue was purified by column chromatography.1.04 g of the title compound 6 was obtained as a white solid(yield: 47%),Its nuclear magnetic resonance spectrum data is as follows:

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1018505-59-3, 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Jiangxi Runze Pharmaceutical Co., Ltd.; Liao Niansheng; Hu Xiande; Zhou Liming; Sui Guilan; (22 pag.)CN109568256; (2019); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1018505-59-3 ,Some common heterocyclic compound, 1018505-59-3, molecular formula is C11H18N4, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 3-chloro-7-(3, 5-dimethoxyphenyl) isoqinoline (50 mg, 0.167 mmol) , 5-(4- ethylpiprazine-l-yl) pyridine-2-amine (38 mg , 0.183 mmol), X-Phos ( 8 mg, 10 mol% ) and cesium carbonate (108.4 mg, 0.334 mmol) in Toluene (4 mL) and t-BuOH (1 mL) (4: 1) argon was purged for 20 min. Then was added Pd(OAc)2 (3.76 mg, 10 mol%) again argon was purged for 5 min. The reaction mixture was heated at 120C for O/N. The reaction mixture was cooled to room temperature and filtered through celite pad and filtrate was concentrated under reduced pressure. Product was purified by column chromatography on silica gel column using DCM: MeOH: NH3 aq. (94:6: 1%) as an eluent to afford 7-(3,5-dimethoxyphenyl)-N-[5- (4-ethylpiperazin-l-yl)pyridin-2-yl]isoquinolin-3 -amine (20 mg) as a brown solid. 1H NMR (400 MHz, CDC13) delta 9.00 (s, 1H), 8.14 (s, 1H), 8.06 (d, J = 2.5 Hz, 1H), 8.00 (s, 1H), 7.79 (dd, J = 19.3, 8.6 Hz, 2H), 7.42 (s, 1H), 7.31 (dd, J = 8.9, 2.7 Hz, 1H), 7.10 (d, J = 8.9 Hz, 1H), 6.83 (d, J = 1.9 Hz, 2H), 6.49 (s, 1H), 3.88 (s, 6H), 3.25 – 3.14 (m, 4H), 2.66 (d, J = 4.4 Hz, 4H), 2.50 (q, J = 7.1 Hz, 2H), 1.15 (t, J = 7.2 Hz, 3H).M/Z: 469.58, M+l : 470.4, tR= 2.1 min. (System 2)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1018505-59-3, its application will become more common.

Reference:
Patent; EVOTEC (UK) LTD.; MC CARTHY, Clive; MILLS, Matthew; WO2014/44846; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 1018505-59-3, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 1018505-59-3, name is 5-(4-Ethylpiperazin-1-yl)pyridin-2-amine. This compound has unique chemical properties. The synthetic route is as follows.

Preparation of 6-bromo-5-ethyl-N-(5-(4-ethylpiperazin-1-yl)pyridin-2-yl)imidazo[1,2-a]pyridin-8-amine A mixture of 5-(4-ethylpiperazin-1-yl)pyridin-2-amine (3.30 g, 16.0 mmol), 6,8-dibromo-5-ethylimidazo[1,2-a]pyridine (5.00 g, 16.4 mmol), 2,2′-bis(diphenylphosphino)-1,1′-binaphthalene (2.14 g, 3.44 mmol) and cesium carbonate (16.4 g, 50.5 mmol) in 1,4-dioxane (200 mL) was sparged with nitrogen while stirring for 10 min. Palladium(II) acetate (368 mg, 1.51 mmol) was then added and the reaction stirred at reflux for 18 h. After this time, the reaction was cooled to room temperature, diluted with a mixture of 1:1 methanol/methylene chloride (200 mL) and filtered through a pad of diatomaceous earth. The filtrate was concentrated under reduced pressure and the resulting residue purified by chromatography (silica, gradient, 1:24 methanol/methylene chloride to 2:23 methanol/methylene chloride) to afford 6-bromo-5-ethyl-N-(5-(4-ethylpiperazin-1-yl)pyridin-2-yl)imidazo[1,2-a]pyridin-8-amine as a brown solid: 1H NMR (400 MHz, CDCl3) d 8.40 (s, 1H), 8.03 (d, J=2.8 Hz, 1H), 7.76 (s, 1H), 7.54 (s, 2H), 7.28-7.25 (m, 1H), 6.84 (d, J=9.2 Hz, 1H), 3.18-3.13 (m, 4H), 3.10 (q, J=7.6 Hz, 2H), 2.64-2.60 (m, 4H), 2.49 (q, J=7.2 Hz, 2H), 1.28 (t, J=7.6 Hz, 3H), 1.13 (t, J=7.2 Hz, 3H).

According to the analysis of related databases, 1018505-59-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Gilead Connecticut, Inc.; Blomgren, Peter A.; Currie, Kevin S.; Kropf, Jeffrey E.; Lee, Seung H.; Mitchell, Scott A.; Schmitt, Aaron C.; Xu, Jianjun; Zhao, Zhongdong; US2014/148430; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1018505-59-3, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 1018505-59-3 as follows.

To a solution of 3-chloro-7-(2, 6-dichloro-3, 5-dimethoxyphenyl) isoqinoline (600 mg, 1.628 mmol), 5-(4-ethylpiprazine-l-yl) pyridine-2-amine (step 3.1) (376 mg, 1.82 mmol), X-Phos (77.60 mg, 10 mol %) and cesium carbonate (1.06 g, 1.25 mmol) in Toluene (15 mL) and t- BuOH (5 mL) (4: 1) argon was purged for 20 min. Then was added Pd2 (dba)3 (149 mg, 10 mol %) again argon was purged for 5 min. The reaction mixture was heated at 120C overnight. The reaction mixture was cooled to room temperature and filtered through celite pad and filtrate was concentrated under reduced pressure. Product was purified by column chromatography on silica gel column using DCM: MeOH: NH3 aq. (95:5: 1%) as an eluent to afford 7-(2, 6-dichloro-3, 5-dimethoxyphenyl)-N-[5-(4-ethylpiperazin-l-yl) pyridin-2-yl] isoquinoline-3 -amine (600 mg) as a pale yellow solid. 1H NMR (400 MHz, CDC13) delta 8.97 (s, 1H), 8.09 (dd, J = 25.7, 7.3 Hz, 2H), 7.82 – 7.68 (m, 2H), 7.41 (dd, J = 8.5, 1.6 Hz, 1H), 7.32 (dd, J = 8.9, 2.9 Hz, 1H), 7.17 – 7.10 (m, 1H), 6.65 (s, 1H), 3.99(s, 6H), 3.26 – 3.16 (m, 4H), 2.71 – 2.62 (m, 4H), 2.51 (q, J = 7.2 Hz, 2H), 1.15 (t, J= 7.2 Hz, 3H). M/Z: 537.1, M+l : 538.6, tR= 0.81 min. (System 1)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1018505-59-3, its application will become more common.

Reference:
Patent; EVOTEC (UK) LTD.; MC CARTHY, Clive; MILLS, Matthew; WO2014/44846; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem