Category: 1019021-85-2

Reference of 1019021-85-2 ,Some common heterocyclic compound, 1019021-85-2, molecular formula is C8H5FN2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 6-fluoroimidazo[1 ,2-a]pyridine-3-carboxylic acid (13a) (210 mg, 1 .2 mmol) in dichloromethane (8 mL) was added oxalyl chloride (250 muIota, 2.8 mmol) and DMF ( 40 muIota) at 0-10 C. The resulting solution was stirred 30 min at room temperature and concentrated under vacuum. A solution of 3-amino-4-fluoro-N-((1 R,2S)-2-hydroxy-2,3- dihydro-1 H-inden-1 -yl)benzamide (16) (350 mg, 1 .2 mmol) in 3 mL of pyridine was added into the above obtained solid. The resulting solution was stirred 30 minutes at room temperature The above solution was purified by preparative mass trigger LCMS to afford N-(2-fluoro-5-(((1 R,2S)-2-hydroxy-2,3-dihydro-1 H-inden-1 -yl)carbamoyl) phenyl)- 6-fluoroimidazo[1 ,2-a]pyridine-3-carboxamide (F27) as a light yellow solid. 1 H NMR (400MHz, d6-MeOH) delta 9.57 (dd, J = 4.8, 2.4 Hz 1 H), 8.60 (s, 1 H), 8.35 (dd, J = 7.2, 2.4 Hz, 1 H), 7.80-7.85 (m, 2H), 7.65-7.71 (m, 1 H) 7.18-7.37 (m, 5H), 5.54 (d, J = 5.2 Hz, 1 H), 4.65 (td, J = 8.4, 2.0 Hz, 1 H), 3.18 (dd, J = 16, 5.2 Hz,1 H), 2.97(dd, J = 16.4, 2.0 Hz, 1 H). (MS m/z 449.1 (M+1 )+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1019021-85-2, its application will become more common.

Reference:
Patent; IRM LLC; NOVARTIS PHARMACEUTICALS UK LIMITED; LIANG, Fang; GIBNEY, Michael; YEH, Vince; LI, Xiaolin; MOLTENI, Valentina; SHAW, Duncan; BERMAN, Ashley Mitchell; LEWIS, Sarah; LOREN, Jon; FURMINGER, Vikki; WO2013/33620; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 1019021-85-2, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 1019021-85-2, name is 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows.

To a stirring suspension of 6-fluoroimidazo[1 ,2-a]pyridine-3-carboxylic acid (24b) (150 mg, 0.833 mmol) in anhydrous dichloromethane (3 ml_) at 0 C under argon was added dropwise oxalyl chloride (74 muIota_, 0.874 mmol). Then, a drop of anhydrous DMF was added and the reaction mixture was stirred at 0 C for 1 .5 hours. The solvent was concentrated and the crude solid was added to a stirring solution of methyl (3-(3-amino- 4-methylphenyl)-1 ,2,4-oxadiazol-5-yl)methylcarbamate (155) (120 mg, 0.416 mmol) in anhydrous pyridine (3 mL) at 0 C. The reaction was stirred at room temperature under argon for 20 minutes. The solvent was concentrated and the crude product was purified by silica chromatography to give methyl (3-(3-(6-fluoroimidazo[1 ,2-a]pyridine-3- carboxamido)-4-methylphenyl)-1 ,2,4-oxadiazol-5-yl)methylcarbamate (F167). 1 H NMR (400MHz, c/6-DMSO) delta 10.12 (s, 1 H), 9.48 – 9.46 (m, 1 H), 8.63 (s, 1 H), 8.07 (t, J = 5.6 Hz, 1 H), 8.06 (d, J = 1 .6 Hz, 1 H), 7.90 – 7.86 (m , 1 H), 7.82 (dd, J = 2.0, 8.0 Hz, 1 H),7.67 – 7.62 (m, 1 H), 7.50 (d, J = 8.0 Hz, 1 H), 4.57 (d, J = 6.0 Hz, 2H), 3.59 (s, 3H), 2.36 (s, 3H). MS m/z 425.39 (M+1 )+.

According to the analysis of related databases, 1019021-85-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; IRM LLC; LIU, Xiaodong; LI, Xiaolin; LOREN, Jon; MOLTENI, Valentina; NABAKKA, Juliet; NGUYEN, Bao; PETRASSI, Hank Michael James; YEH, Vince; WO2013/33116; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1019021-85-2, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1019021-85-2, name is 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid, molecular formula is C8H5FN2O2, molecular weight is 180.1359, as common compound, the synthetic route is as follows.

Oxalyl chloride (10 mL, 1 10 mmol) was added dropwise to a stirred suspension of 6- fluoroimidazo[1 ,2-a]pyridine-3-carboxylic acid (24b) (2 g, 1 1 mmol) and catalytic amounts of DMF in dichloromethane (20 mL). After 5 hours, the solvent was evaporated and the solid was suspended in dry DCE (20 mL) and added to a stirred solution of 3- amino-4-methylbenzonitrile (1 .45 g, 1 1 mmol) and DIEA (6 mmol) in DCE (1 0 mL) at 0 C. After the addition, the reaction was heated at 60 C for 5 hours. The mixture was subjected to standard aqueous work and silica purification to give N-(5-cyano-2- methylphenyl)-6-fluoroimidazo[1 ,2-a]pyridine-3-carboxamide (39) as a solid. 1 H NMR (400MHz, c/6-DMSO) delta 10.14 (s, 1 H), 9.45 (dd, J = 5.2, 2.0 Hz, 1 H), 8.62 (s, 1 H), 7.90 – 7.87 (m, 2 H), 7.68-7.63 (m, 1 H), 7.53 (d, J = 8.0 Hz, 1 H), 2.37 (s, 3H). MS m/z 295.1 (M+1 ) +.

Statistics shows that 1019021-85-2 is playing an increasingly important role. we look forward to future research findings about 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid.

Reference:
Patent; IRM LLC; LOREN, Jon; LI, Xiaolin; LIU, Xiaodong; MOLTENI, Valentina; NABAKKA, Juliet; NGUYEN, Bao; PETRASSI, Hank Michael James; YEH, Vince; RUCKER, Paul Vincent; WO2013/33203; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1019021-85-2, 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 1019021-85-2, blongs to pyridine-derivatives compound. SDS of cas: 1019021-85-2

Oxalyl chloride (10 mL, 110 mmol) was added dropwise to a stirred suspension of 6-fluoroimidazo[1,2-a]pyridine-3-carboxylic acid (24b) (2 g, 11 mmol) and catalytic amounts of DMF in dichloromethane (20 mL). After 5 hours, the solvent was evaporated and the solid was suspended in dry DCE (20 mL) and added to a stirred solution of 3-amino-4-methylbenzonitrile (1.45 g, 11 mmol) and DIEA (6 mmol) in DCE (10 mL) at 0 C. After the addition, the reaction was heated at 60 C. for 5 hours. The mixture was subjected to standard aqueous work and silica purification to give N-(5-cyano-2-methylphenyl)-6-fluoroimidazo[1,2-a]pyridine-3-carboxamide (39) as a solid. 1H NMR (400 MHz, d6-DMSO) delta 10.14 (s, 1H), 9.45 (dd, J=5.2, 2.0 Hz, 1H), 8.62 (s, 1H), 7.90-7.87 (m, 2H), 7.68-7.63 (m, 1H), 7.53 (d, J=8.0 Hz, 1H), 2.37 (s, 3H). MS m/z 295.1 (M+1)+.; NH2OH (5 mL, 16.1 mmol) was added in one portion to a stirred suspension of N-(5-cyano-2-methylphenyl)-6-fluoroimidazo[1,2-a]pyridine-3-carboxamide (39) (0.95 g, 3.23 mmol). The resulting suspension was heated at 60 C. overnight and then cooled to 0 C. The product, (Z)-6-fluoro-N-(5-(N?-hydroxycarbamimidoyl)-2-methylphenyl)imidazo[1,2-a]pyridine-3-carboxamide (40) was collected by filtration. MS m/z 328.1 (M+1)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1019021-85-2, its application will become more common.

Reference:
Patent; IRM LLC; YEH, Vince; LI, Xiaolin; LIU, Xiaodong; LOREN, Jon; MOLTENI, Valentina; NABAKKA, Juliet; NGUYEN, Bao; PETRASSI, Hank Michael James; US2013/59846; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1019021-85-2, 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 1019021-85-2, blongs to pyridine-derivatives compound. SDS of cas: 1019021-85-2

Oxalyl chloride (10 mL, 110 mmol) was added dropwise to a stirred suspension of 6-fluoroimidazo[1,2-a]pyridine-3-carboxylic acid (24b) (2 g, 11 mmol) and catalytic amounts of DMF in dichloromethane (20 mL). After 5 hours, the solvent was evaporated and the solid was suspended in dry DCE (20 mL) and added to a stirred solution of 3-amino-4-methylbenzonitrile (1.45 g, 11 mmol) and DIEA (6 mmol) in DCE (10 mL) at 0 C. After the addition, the reaction was heated at 60 C. for 5 hours. The mixture was subjected to standard aqueous work and silica purification to give N-(5-cyano-2-methylphenyl)-6-fluoroimidazo[1,2-a]pyridine-3-carboxamide (39) as a solid. 1H NMR (400 MHz, d6-DMSO) delta 10.14 (s, 1H), 9.45 (dd, J=5.2, 2.0 Hz, 1H), 8.62 (s, 1H), 7.90-7.87 (m, 2H), 7.68-7.63 (m, 1H), 7.53 (d, J=8.0 Hz, 1H), 2.37 (s, 3H). MS m/z 295.1 (M+1)+.; NH2OH (5 mL, 16.1 mmol) was added in one portion to a stirred suspension of N-(5-cyano-2-methylphenyl)-6-fluoroimidazo[1,2-a]pyridine-3-carboxamide (39) (0.95 g, 3.23 mmol). The resulting suspension was heated at 60 C. overnight and then cooled to 0 C. The product, (Z)-6-fluoro-N-(5-(N?-hydroxycarbamimidoyl)-2-methylphenyl)imidazo[1,2-a]pyridine-3-carboxamide (40) was collected by filtration. MS m/z 328.1 (M+1)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1019021-85-2, its application will become more common.

Reference:
Patent; IRM LLC; YEH, Vince; LI, Xiaolin; LIU, Xiaodong; LOREN, Jon; MOLTENI, Valentina; NABAKKA, Juliet; NGUYEN, Bao; PETRASSI, Hank Michael James; US2013/59846; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 1019021-85-2, 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 1019021-85-2, blongs to pyridine-derivatives compound. SDS of cas: 1019021-85-2

Oxalyl chloride (10 mL, 110 mmol) was added dropwise to a stirred suspension of 6-fluoroimidazo[1,2-a]pyridine-3-carboxylic acid (24b) (2 g, 11 mmol) and catalytic amounts of DMF in dichloromethane (20 mL). After 5 hours, the solvent was evaporated and the solid was suspended in dry DCE (20 mL) and added to a stirred solution of 3-amino-4-methylbenzonitrile (1.45 g, 11 mmol) and DIEA (6 mmol) in DCE (10 mL) at 0 C. After the addition, the reaction was heated at 60 C. for 5 hours. The mixture was subjected to standard aqueous work and silica purification to give N-(5-cyano-2-methylphenyl)-6-fluoroimidazo[1,2-a]pyridine-3-carboxamide (39) as a solid. 1H NMR (400 MHz, d6-DMSO) delta 10.14 (s, 1H), 9.45 (dd, J=5.2, 2.0 Hz, 1H), 8.62 (s, 1H), 7.90-7.87 (m, 2H), 7.68-7.63 (m, 1H), 7.53 (d, J=8.0 Hz, 1H), 2.37 (s, 3H). MS m/z 295.1 (M+1)+.; NH2OH (5 mL, 16.1 mmol) was added in one portion to a stirred suspension of N-(5-cyano-2-methylphenyl)-6-fluoroimidazo[1,2-a]pyridine-3-carboxamide (39) (0.95 g, 3.23 mmol). The resulting suspension was heated at 60 C. overnight and then cooled to 0 C. The product, (Z)-6-fluoro-N-(5-(N?-hydroxycarbamimidoyl)-2-methylphenyl)imidazo[1,2-a]pyridine-3-carboxamide (40) was collected by filtration. MS m/z 328.1 (M+1)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1019021-85-2, its application will become more common.

Reference:
Patent; IRM LLC; YEH, Vince; LI, Xiaolin; LIU, Xiaodong; LOREN, Jon; MOLTENI, Valentina; NABAKKA, Juliet; NGUYEN, Bao; PETRASSI, Hank Michael James; US2013/59846; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1019021-85-2, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1019021-85-2, name is 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid, molecular formula is C8H5FN2O2, molecular weight is 180.1359, as common compound, the synthetic route is as follows.

Oxalyl chloride (10 mL, 1 10 mmol) was added dropwise to a stirred suspension of 6- fluoroimidazo[1 ,2-a]pyridine-3-carboxylic acid (24b) (2 g, 1 1 mmol) and catalytic amounts of DMF in dichloromethane (20 mL). After 5 hours, the solvent was evaporated and the solid was suspended in dry DCE (20 mL) and added to a stirred solution of 3- amino-4-methylbenzonitrile (1 .45 g, 1 1 mmol) and DIEA (6 mmol) in DCE (1 0 mL) at 0 C. After the addition, the reaction was heated at 60 C for 5 hours. The mixture was subjected to standard aqueous work and silica purification to give N-(5-cyano-2- methylphenyl)-6-fluoroimidazo[1 ,2-a]pyridine-3-carboxamide (39) as a solid. 1 H NMR (400MHz, c/6-DMSO) delta 10.14 (s, 1 H), 9.45 (dd, J = 5.2, 2.0 Hz, 1 H), 8.62 (s, 1 H), 7.90 – 7.87 (m, 2 H), 7.68-7.63 (m, 1 H), 7.53 (d, J = 8.0 Hz, 1 H), 2.37 (s, 3H). MS m/z 295.1 (M+1 ) +. NH2OH (5 mL, 16.1 mmol) was added in one portion to a stirred suspension of N-(5- cyano-2-methylphenyl)-6-fluoroimidazo[1 ,2-a]pyridine-3-carboxamide (39) (0.95 g, 3.23 mmol). The resulting suspension was heated at 60 C overnight and then cooled to 0 C. The product, (Z)-6-fluoro-N-(5-(N’-hydroxycarbamimidoyl)-2-methylphenyl)imidazo[1 ,2- a]pyridine-3-carboxamide (40) was collected by filtration. MS m/z 328.1 (M+1 ) +.

Statistics shows that 1019021-85-2 is playing an increasingly important role. we look forward to future research findings about 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid.

Reference:
Patent; IRM LLC; LIU, Xiaodong; LI, Xiaolin; LOREN, Jon; MOLTENI, Valentina; NABAKKA, Juliet; NGUYEN, Bao; PETRASSI, Hank Michael James; YEH, Vince; WO2013/33116; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1019021-85-2, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1019021-85-2, name is 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid, molecular formula is C8H5FN2O2, molecular weight is 180.1359, as common compound, the synthetic route is as follows.

Oxalyl chloride (10 mL, 1 10 mmol) was added dropwise to a stirred suspension of 6- fluoroimidazo[1 ,2-a]pyridine-3-carboxylic acid (24b) (2 g, 1 1 mmol) and catalytic amounts of DMF in dichloromethane (20 mL). After 5 hours, the solvent was evaporated and the solid was suspended in dry DCE (20 mL) and added to a stirred solution of 3- amino-4-methylbenzonitrile (1 .45 g, 1 1 mmol) and DIEA (6 mmol) in DCE (1 0 mL) at 0 C. After the addition, the reaction was heated at 60 C for 5 hours. The mixture was subjected to standard aqueous work and silica purification to give N-(5-cyano-2- methylphenyl)-6-fluoroimidazo[1 ,2-a]pyridine-3-carboxamide (39) as a solid. 1 H NMR (400MHz, c/6-DMSO) delta 10.14 (s, 1 H), 9.45 (dd, J = 5.2, 2.0 Hz, 1 H), 8.62 (s, 1 H), 7.90 – 7.87 (m, 2 H), 7.68-7.63 (m, 1 H), 7.53 (d, J = 8.0 Hz, 1 H), 2.37 (s, 3H). MS m/z 295.1 (M+1 ) +. NH2OH (5 mL, 16.1 mmol) was added in one portion to a stirred suspension of N-(5- cyano-2-methylphenyl)-6-fluoroimidazo[1 ,2-a]pyridine-3-carboxamide (39) (0.95 g, 3.23 mmol). The resulting suspension was heated at 60 C overnight and then cooled to 0 C. The product, (Z)-6-fluoro-N-(5-(N’-hydroxycarbamimidoyl)-2-methylphenyl)imidazo[1 ,2- a]pyridine-3-carboxamide (40) was collected by filtration. MS m/z 328.1 (M+1 ) +.

Statistics shows that 1019021-85-2 is playing an increasingly important role. we look forward to future research findings about 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid.

Reference:
Patent; IRM LLC; LIU, Xiaodong; LI, Xiaolin; LOREN, Jon; MOLTENI, Valentina; NABAKKA, Juliet; NGUYEN, Bao; PETRASSI, Hank Michael James; YEH, Vince; WO2013/33116; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 1019021-85-2, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 1019021-85-2, name is 6-Fluoroimidazo[1,2-a]pyridine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows.

Oxalyl chloride (10 mL, 110 mmol) was added dropwise to a stirred suspension of 6-fluoroimidazo[1,2-a]pyridine-3-carboxylic acid (24b) (2 g, 11 mmol) and catalytic amounts of DMF in dichloromethane (20 mL). After 5 hours, the solvent was evaporated and the solid was suspended in dry DCE (20 mL) and added to a stirred solution of 3-amino-4-methylbenzonitrile (1.45 g, 11 mmol) and DIEA (6 mmol) in DCE (10 mL) at 0 C. After the addition, the reaction was heated at 60 C. for 5 hours. The mixture was subjected to standard aqueous work and silica purification to give N-(5-cyano-2-methylphenyl)-6-fluoroimidazo[1,2-a]pyridine-3-carboxamide (39) as a solid. 1H NMR (400 MHz, d6-DMSO) delta 10.14 (s, 1H), 9.45 (dd, J=5.2, 2.0 Hz, 1H), 8.62 (s, 1H), 7.90-7.87 (m, 2H), 7.68-7.63 (m, 1H), 7.53 (d, J=8.0 Hz, 1H), 2.37 (s, 3H). MS m/z 295.1 (M+1)+.

According to the analysis of related databases, 1019021-85-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MOLTENI, Valentina; PETRASSI, Hank Michael James; LI, Xiaolin; LIU, Xiaodong; LOREN, Jon; NABAKKA, Juliet; NGUYEN, Bao; YEH, Vince; US2013/59832; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem