Category: 1111637-94-5

Application of 1111637-94-5 , The common heterocyclic compound, 1111637-94-5, name is 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine, molecular formula is C8H7BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A solution of 19 (100 mg, 0.434 mmol) and 52 (118.2 mg, 0.434 mmol) in toluene/ ethanol (4:1) was added sodium carbonate (95.04 mg, 0.868 mmol). The reaction was degassed and purged with nitrogen for 10 min. Pd(dppf)Cl2 (17.72 mg, 0.0217 mmol) was added to the reaction. The reaction mass was degassed and purged with nitrogen for another 10 min. The reaction was heated to 80 C. under sealed condition overnight. The reaction was allowed to cool to rt and diluted with chloroform. The organic layer was filtered through Celite bed and concentrated to get the crude, which was purified through flash chromatography by using 100-200 mesh silica gel. The compound was eluted at 2% methanol in chloroform as off-white colour solid compound 53. MS-ES+ 277.9; 1H NMR (400 MHz, DMSO-D6) 53: 11.31 (s, 1H), 9.46 (s, 1H), 8.12 (d, 1H), 7.83 (d, 1H), 7.56 (d, 1H), 7.33 (m, 4H), 7.24 (bs, 1H), 6.30 (m, 1H), 6.11 (m, 1H), 5.62 (m, 1H), 2.22 (s, 3H).

The synthetic route of 1111637-94-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARRIEN PHARMACEUTICALS LLC; Vankayalapati, Hariprasad; Yerramreddy, Venkatakrishnareddy; Gangireddy, Paramareddy; Appalaneni, Rajendra P.; US2014/315909; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1111637-94-5, Adding some certain compound to certain chemical reactions, such as: 1111637-94-5, name is 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine,molecular formula is C8H7BrN2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1111637-94-5.

Preparation of 3-methyl-5-(4,4,5,5-tetramethyl-1 ,3,2-dioxaborolan-2-yl)-1 H-pyrrolo[2,3-b]pyridine (B-5-5)To a solution of 5-bromo-3-methyl-1 H-pyrrolo[2,3-b]pyridine (B-5-4) (0.5 g, 2.37 mmol) in DMF (150 mL) were added KOAc (0.7 g, 7.11 mmol) and bis(pinacolato)diboron (0.72 g, 2.84 mmol). The resulting mixture was degassed under N2 for 2 minutes. Then Pd(PPh3J2CI2 (0.2 g, 0.237 mmol) was added and the mixture was degassed again. The reaction was heated to 80-900C and stirred overnight. The mixture was poured into water (30 mL), extracted with EtOAc (15 mLchi3). The organic layer was washed with saturated aqueous NaCI, dried over Na2SO4 and concentrated to give crude 3-methyl-5-(4,4,5,5-tetramethyl-1 ,3,2- dioxaborolan-2-yl)-1 H-pyrrolo[2,3-b]pyridine (B-5-5) (0.7 g), which was used directly in next step.

According to the analysis of related databases, 1111637-94-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; PFIZER INC.; WO2009/16460; (2009); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1111637-94-5, Adding some certain compound to certain chemical reactions, such as: 1111637-94-5, name is 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine,molecular formula is C8H7BrN2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1111637-94-5.

Preparation of 3-methyl-5-(4,4,5,5-tetramethyl-1 ,3,2-dioxaborolan-2-yl)-1 H-pyrrolo[2,3-b]pyridine (B-5-5)To a solution of 5-bromo-3-methyl-1 H-pyrrolo[2,3-b]pyridine (B-5-4) (0.5 g, 2.37 mmol) in DMF (150 mL) were added KOAc (0.7 g, 7.11 mmol) and bis(pinacolato)diboron (0.72 g, 2.84 mmol). The resulting mixture was degassed under N2 for 2 minutes. Then Pd(PPh3J2CI2 (0.2 g, 0.237 mmol) was added and the mixture was degassed again. The reaction was heated to 80-900C and stirred overnight. The mixture was poured into water (30 mL), extracted with EtOAc (15 mLchi3). The organic layer was washed with saturated aqueous NaCI, dried over Na2SO4 and concentrated to give crude 3-methyl-5-(4,4,5,5-tetramethyl-1 ,3,2- dioxaborolan-2-yl)-1 H-pyrrolo[2,3-b]pyridine (B-5-5) (0.7 g), which was used directly in next step.

According to the analysis of related databases, 1111637-94-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; PFIZER INC.; WO2009/16460; (2009); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 1111637-94-5 , The common heterocyclic compound, 1111637-94-5, name is 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine, molecular formula is C8H7BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A solution of 19 (50 mg, 0.2369 mmol) and 2 (50 mg, 0.2369 mmol) in ethanol and toluene (1:4 mL) was added sodium carbonate (49.74 mg, 0.4738 mmol). The reaction was degassed and purged with nitrogen for 15 min. Pd(dppf)Cl2.DCM (9.06 mg, 0.0114 mmol), and again degassed for 15 min. The reaction mixture was stirred for 2 h at 90 C. and the reaction mixture allowed to cool to rt and diluted with DCM (25 mL). The organic layer was filtered through Celite and concentrated to get the crude. The resulting oil was purified via silica gel chromatography using a gradient of 30% ethyl acetate:hexane to afford Compound 20. MS-ES+ 277 1H NMR (400 MHz, DMSO-D6) 20: 11.37 (d, 1H), 10.24 (d, 1H), 8.45 (d, 1H), 8.09 (d, 2H), 7.68 (d, 1H), 7.43 (d, 2H), 7.28 (d, 1H), 6.46 (d, 1H), 6.44 (d, 1H), 5.79 (d, 1H), 2.30 (d, 1H).

The synthetic route of 1111637-94-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARRIEN PHARMACEUTICALS LLC; Vankayalapati, Hariprasad; Yerramreddy, Venkatakrishnareddy; Gangireddy, Paramareddy; Appalaneni, Rajendra P.; US2014/315909; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 1111637-94-5 , The common heterocyclic compound, 1111637-94-5, name is 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine, molecular formula is C8H7BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A solution of 19 (50 mg, 0.2369 mmol) and 2 (50 mg, 0.2369 mmol) in ethanol and toluene (1:4 mL) was added sodium carbonate (49.74 mg, 0.4738 mmol). The reaction was degassed and purged with nitrogen for 15 min. Pd(dppf)Cl2.DCM (9.06 mg, 0.0114 mmol), and again degassed for 15 min. The reaction mixture was stirred for 2 h at 90 C. and the reaction mixture allowed to cool to rt and diluted with DCM (25 mL). The organic layer was filtered through Celite and concentrated to get the crude. The resulting oil was purified via silica gel chromatography using a gradient of 30% ethyl acetate:hexane to afford Compound 20. MS-ES+ 277 1H NMR (400 MHz, DMSO-D6) 20: 11.37 (d, 1H), 10.24 (d, 1H), 8.45 (d, 1H), 8.09 (d, 2H), 7.68 (d, 1H), 7.43 (d, 2H), 7.28 (d, 1H), 6.46 (d, 1H), 6.44 (d, 1H), 5.79 (d, 1H), 2.30 (d, 1H).

The synthetic route of 1111637-94-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARRIEN PHARMACEUTICALS LLC; Vankayalapati, Hariprasad; Yerramreddy, Venkatakrishnareddy; Gangireddy, Paramareddy; Appalaneni, Rajendra P.; US2014/315909; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 1111637-94-5, Adding some certain compound to certain chemical reactions, such as: 1111637-94-5, name is 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine,molecular formula is C8H7BrN2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1111637-94-5.

NaH (60 in oil, 284 mg, 7.11 mmol) is added to an ice-cooled sol. of 5-bromo-3-methyl-7-azaindole (1.0 g, 4.74 mmol) in THF (12 mL). The mixture is stirred at rt for 15 min, then cooled again to 0 C. Mel (1.19 mL, 19 mmol) is added, and the resulting mixture is stirred at 0 C for 10 min, then at rt overnight. Water is slowly added, followed by MgSC^. The mixture is filtered, and the solvents are removed under reduced pressure. Purification of the residue by automated FC (Combiflash, column 40 g, flow 40 mL/min, EtOAc / heptane 0: 100?20:80) yields the title product. LC-MS: tR = 0.87 min, MH+ = 226.94 (conditions 3).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1111637-94-5, 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; SIEGRIST, Romain; HEIDMANN, Bibia; STAMM, Simon; GATFIELD, John; BEZENCON, Olivier; WO2015/186056; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1111637-94-5 ,Some common heterocyclic compound, 1111637-94-5, molecular formula is C8H7BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A solution of 19 (205.4 mg, 0.909 mmol) and 40 (150 mg, 0.909 mmol) in toluene/ ethanol (4 mL: 1 mL) was added sodium carbonate (190.8 mg, 1.818 mmol). The reaction was degassed and purged with nitrogen for 10 min. Pd(dppf)Cl2 (37.1 mg, 0.0454 mmol) was added to the reaction, which was degassed and purged with nitrogen for another 10 min, heated to 90 C. under sealed condition overnight, then allowed to cool to rt, and diluted with chloroform. The organic layer was filtered through Celite plug and concentrated to get the crude, which was purified through flash chromatography by using 100-200 mesh silica gel. The compound was eluted in 50% ethyl acetate in hexane as off-white solid 88.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1111637-94-5, its application will become more common.

Reference:
Patent; ARRIEN PHARMACEUTICALS LLC; Vankayalapati, Hariprasad; Yerramreddy, Venkatakrishnareddy; Gangireddy, Paramareddy; Appalaneni, Rajendra P.; US2014/315909; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1111637-94-5 ,Some common heterocyclic compound, 1111637-94-5, molecular formula is C8H7BrN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A solution of 19 (205.4 mg, 0.909 mmol) and 40 (150 mg, 0.909 mmol) in toluene/ ethanol (4 mL: 1 mL) was added sodium carbonate (190.8 mg, 1.818 mmol). The reaction was degassed and purged with nitrogen for 10 min. Pd(dppf)Cl2 (37.1 mg, 0.0454 mmol) was added to the reaction, which was degassed and purged with nitrogen for another 10 min, heated to 90 C. under sealed condition overnight, then allowed to cool to rt, and diluted with chloroform. The organic layer was filtered through Celite plug and concentrated to get the crude, which was purified through flash chromatography by using 100-200 mesh silica gel. The compound was eluted in 50% ethyl acetate in hexane as off-white solid 88.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1111637-94-5, its application will become more common.

Reference:
Patent; ARRIEN PHARMACEUTICALS LLC; Vankayalapati, Hariprasad; Yerramreddy, Venkatakrishnareddy; Gangireddy, Paramareddy; Appalaneni, Rajendra P.; US2014/315909; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 1111637-94-5, name is 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine. A new synthetic method of this compound is introduced below., COA of Formula: C8H7BrN2

A solution of 19 (200 mg, 0.952 mmol) and 27 (162.8 mg, 0.952 mmol) in acetonitrile was added Na2CO3 (201.6 mg, 1.904 mmol). The reaction was degassed and purged with nitrogen for 10 min. Pd(dppf)Cl2 (38.8 mg, 0.0476 mmol) was added to the reaction. The reaction mass was degassed and purged with nitrogen for another 10 min. The reaction was heated to 90 C. under sealed conditions overnight, then allowed to cool to RT and diluted with chloroform. The organic layer was filtered through Celite and concentrated to get the crude, which was purified through flash chromatography by using 100-200 silica mesh. The compound was eluted at 2% methanol chloroform as off-white colour solid 28.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 1111637-94-5, 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine.

Reference:
Patent; ARRIEN PHARMACEUTICALS LLC; Vankayalapati, Hariprasad; Yerramreddy, Venkatakrishnareddy; Gangireddy, Paramareddy; Appalaneni, Rajendra P.; US2014/315909; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 1111637-94-5, name is 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine. A new synthetic method of this compound is introduced below., COA of Formula: C8H7BrN2

A solution of 19 (200 mg, 0.952 mmol) and 27 (162.8 mg, 0.952 mmol) in acetonitrile was added Na2CO3 (201.6 mg, 1.904 mmol). The reaction was degassed and purged with nitrogen for 10 min. Pd(dppf)Cl2 (38.8 mg, 0.0476 mmol) was added to the reaction. The reaction mass was degassed and purged with nitrogen for another 10 min. The reaction was heated to 90 C. under sealed conditions overnight, then allowed to cool to RT and diluted with chloroform. The organic layer was filtered through Celite and concentrated to get the crude, which was purified through flash chromatography by using 100-200 silica mesh. The compound was eluted at 2% methanol chloroform as off-white colour solid 28.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 1111637-94-5, 5-Bromo-3-methyl-1H-pyrrolo[2,3-b]pyridine.

Reference:
Patent; ARRIEN PHARMACEUTICALS LLC; Vankayalapati, Hariprasad; Yerramreddy, Venkatakrishnareddy; Gangireddy, Paramareddy; Appalaneni, Rajendra P.; US2014/315909; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem