Sep 2021 News Some scientific research about 1123194-98-8

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1123194-98-8, 6-Bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine, and friends who are interested can also refer to it.

Adding a certain compound to certain chemical reactions, such as: 1123194-98-8, 6-Bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Recommanded Product: 1123194-98-8, blongs to pyridine-derivatives compound. Recommanded Product: 1123194-98-8

DMF (52mL) was added to 6-Bromo-2-methoxy-3-(4-methyl-l H- imidazol-1-yl)pyridine (13.Og, 48.5mmol) and the tert-Butyl 2- acryloylhydrazinecarboxylate (9,9g, 53.3mmol) at room temperature under nitrogen atmosphere, And the mixture was stirred at 50C for 10minutes, Tri(o-tolyl)phosphine (885mg, 2.90mmol), Palladium (II) acetate (327mg, 1.45mmol) and N,N- diisopropylethylamine (12.7mL, 72.7mmol) were added to the mixture, and the reaction mixture was stirred at 100C for 4hours. The reaction mixture was cooled to room temperature and filtrated through Celite. The residue was washed twice with DMF (6mL). Water (104mL) was added dropwise to the filtrate at room temperature over lOminutes. The mixture was stirred at room temperature for l5hoursAfter the mixture was filtrated, the residue was washed with water/DMF =2; 1(3OmL) and MTBE (3OmL). The obtained solid was suspended in MTBE (5OmL) at room temperature for 2hours, filtrated and dried under the reduced pressure to obtain the title compound (15.8g, 87% yield).

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1123194-98-8, 6-Bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine, and friends who are interested can also refer to it.

Reference:
Patent; EISAI R&D MANAGEMENT CO., LTD.; NAKAMURA, Taiju; MATSUDA, Masaaki; HU, Yongbo; HASEGAWA, Daiju; HOSHINO, Yorihisa; INANAGA, Kazato; ISOMURA, Minetaka; SATO, Nobuaki; YOSHIZAWA, Kazuhiro; MONIZ, George A.; WILKIE, Gordon D.; FANG, Francis G.; NISHIKAWA, Yoshihiro; WO2010/25197; (2010); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

New downstream synthetic route of 6-Bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1123194-98-8, 6-Bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine, other downstream synthetic routes, hurry up and to see.

Electric Literature of 1123194-98-8 ,Some common heterocyclic compound, 1123194-98-8, molecular formula is C10H10BrN3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Synthesis of (E)-3-[6-methoxy-5-(4-methyl-1H-imidazol-1-yl)pyridin-2-yl]acrylamide Triethylamine (52 ml) was added to a suspension of 6-bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine (49.8 g), tris(dibenzylideneacetone)dipalladium (0) (5.11 g), tri-o-tolylphosphine (3.41 g) and acrylamide (14.5 g) in N,N-dimethyl formamide (260 ml). The reaction solution was stirred at 100C for 50 minutes. The reaction solution was returned to room temperature and then filtered through celite. The filter cake was sequentially washed with N,N-dimethylformamide, methanol, a 50% N,N-dimethylformamide solution and N,N-dimethylformamide. The resulting filtrate was filtered through celite again, and the filtrate was concentrated under reduced pressure. Toluene was added to the residue, and the reaction solution was concentrated again. Toluene and a saturated sodium bicarbonate solution were added to the resulting residue, and the insoluble matter was collected by filtration. The resulting powder was dried under reduced pressure to obtain 42.96 g of the title compound. The property values of the compound are as follows. 1H-NMR (CDCl3) delta (ppm): 2.30 (d, J=0.8Hz, 3H), 4.07 (s, 3H), 5.57 (brs, 1H), 5.68 (brs, 1H), 6.98 (brs, 1H), 7.00 (d, J=15.2Hz, 1H), 7.06 (d, J=7.6Hz, 1H), 7.54 (d, J=7.6Hz, 1H), 7.56 (d, J=15.2Hz, 1H), 7.82 (d, J=1.2Hz, 1H). ESI-MS; m/z 259 [M++H].

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1123194-98-8, 6-Bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Eisai R&D Management Co., Ltd.; EP2181992; (2010); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Brief introduction of 6-Bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine

The synthetic route of 1123194-98-8 has been constantly updated, and we look forward to future research findings.

Reference of 1123194-98-8 , The common heterocyclic compound, 1123194-98-8, name is 6-Bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl)pyridine, molecular formula is C10H10BrN3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a stirred solution6-bromo-2-methoxy-3-(4-methyl-1H-imidazol-1-yl) pyridine (20 g, 74 mmol) in DMF (240 mL) at room temperature under an argon atmosphere were added Pd(dppf)2C12 (500 mg, 0.9 mmol), Pd2(dba)3 (682 mg, 0.7 mmol) and zinc cyanide (5.3 g, 45 mmol). The reaction mixture was stirred at 140 C for 2 h. After consumption of starting material (monitored by TLC), the reaction mixture was diluted with 25% NH4OH solution (240 mL) to afford the solid. The solid was collected by filtration and dried in vacuo to afford 6-methoxy-5-(4- methyl-1H-imidazol-1-yl) picolinonitrile (14 g, 88%) as a pale yellow solid.[0872] ?H NMR (CDC13: 400 MHz): 7.89 (s, 1H), 7.63 (d, 1H), 7.43 (d, 1H), 7.01 (s, 1H), 4.09 (s, 3H), 2.30 (s, 3H); LCMS: 98.7%; 214.9 (M+1); (column; Ascentis Express C-18 (50 x 3.0 mm, 2.7 pm); RT 1.19 mm; mobile phase: 0.025% Aq TFA+5% ACN:ACN+5% 0.025% Aq TFA; T/B%: 0.0 1/5, 0.5/5, 3/100, 5/100; flow rate: 1.2 mL/min) (Gradient); TLC: EtOAc (R1 0.3).

The synthetic route of 1123194-98-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FORUM PHARMCEUTICALS INC.; ACHARYA, Raksha; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; COOK, Andrew, Simon; HARRISON, Bryce, Alden; MCRINER, Andrew, J.; (451 pag.)WO2016/201168; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem