Category: 1256808-59-9

Adding a certain compound to certain chemical reactions, such as: 1256808-59-9, 5-Fluoro-3-methylpicolinic acid, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 1256808-59-9, blongs to pyridine-derivatives compound. Application In Synthesis of 5-Fluoro-3-methylpicolinic acid

5-Fluoro-3-methylpicolinic acid (200 mg, 1.29 mmol) was suspended in dichloromethane (4 mL), the suspension was cooled to 0-5C (ice bath) and oxalyl chloride (435 mg, 300 mu, 3.43 mmol) as well as a drop of a mixture of dimethylformamide and toluene (1 :3, v/v) were added. The mixture was stirred for 1 h at room temperature. Then, it was concentrated in vacuo at 40C, the residue was treated with n-heptane (4 mL) and again concentrated and dried in vacuo (40C, 5 mbar) to afford 5-fluoro-3-methylpicolinoyl chloride as dark brown oil (220 mg). After that, tert-butyl ((4aR,5R,9R)-5-(6-amino-3-fluoropyridin-2-yl)-5,8,8-trimethyl- 9-oxido-2,3 ,4,4a,5 ,8-hexahydro- [ 1 ,4] thiazino [2, 1 -f] [ 1 ,2] thiazin-7-yl)carbamate (Int- 17 A A, 100 mg, 228 muiotaetaomicron) was dissolved in dichloromethane (4 mL), the solution cooled to 0-5C (ice bath) and N,N-diisopropylethylamine (75.5 mg, 100 mu, 584 muiotaetaomicron) was added, followed by a solution of 5-fluoro-3-methylpicolinoyl chloride (vide supra, 50 mg, 288 muiotaetaomicron) in dichloromethane (1 mL). The reaction mixture was stirred at 0-5C for 1.5 h. Then, ethanol (100 mu) was added, the mixture was stirred for 45 min at room temperature, poured onto a saturated aqueous solution of sodium hydrogencarbonate (15 mL) and extracted with dichloromethane (1 x 30 mL, 2 x 20 mL). The combined extracts were dried (sodium sulfate) and concentrated in vacuo. The crude was purified by column chromatography (silica gel, 50 g, eluting with ethyl acetate / n-heptane, gradient 60:40 to 80:20) to afford, after drying in vacuo (50C, 5 mbar), the title compound as a white foam (115 mg, 88% yield). HPLC (method LCMS_gradient) tR = 3.2 min. 1H NMR (CDC13, 400 MHz): delta 1.48 (s, 9 H), 1.79 (s, 3 H), 1.80-2.01 (m, 3 H), 1.85 (s, 3 H), 1.96 (d, J = 1.2 Hz, 3 H), 2.31-2.48 (m, 1 H), 2.83 (s, 3 H), 3.35-3.45 (m, 1 H), 3.56-3.68 (m, 1 H), 4.07-4.14 (m, 1 H), 7.40 (ddd, J = 0.6, 2.7, 8.8 Hz, 1 H), 7.55 (dd, J = 8.9, 10.9 Hz, 1 H), 8.38 (d, J = 2.6 Hz, 1 H), 8.41 (dd, / = 3.0, 8.9 Hz, 1 H), 10.41 (br s, 1 H), 11.23 (br s, 1 H, exch). MS (ES+) m/z 577.3 [M+H].

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1256808-59-9, its application will become more common.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; CUENI, Philipp; DOLENTE, Cosimo; GUBA, Wolfgang; HAAP, Wolfgang; KUGLSTATTER, Andreas; OBST SANDER, Ulrike; PETERS, Jens-Uwe; ROGERS-EVANS, Mark; VIFIAN, Walter; WOLTERING, Thomas; (231 pag.)WO2016/55496; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1256808-59-9, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1256808-59-9, name is 5-Fluoro-3-methylpicolinic acid, molecular formula is C7H6FNO2, molecular weight is 155.13, as common compound, the synthetic route is as follows.

To a solution of tert-butyl ((3aR,4R,8S)-4-(6-amino-3-fluoropyridin-2-yl)-4,7,7- trimethyl-8-oxido-3,3a,4,7-tetrahydro-2H-isothiazolo[l,5-a][l,4]thiazin-6-yl)carbamate (Int- 39BA, 150 mg, 0.35 mmol) in THF (20 mL) was added 5-fluoro-3-methylpicolinic acid (82 mg, 0.53 mmol) followed by T3P (1.1 g, 1.75 mmol, 50% in ethyl acetate), and diisopropylethylamine (267 mg, 2.1 mmol). The reaction was stirred at 70 C for 4 h. After that, the reaction mixture was diluted with aqueous saturated sodium hydrogencarbonate solution (20 mL) and extracted with ethyl acetate (3 x 30 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated to give a crude product. The crude was purified by column chromatography (silica gel, eluting with petroleum ether / ethyl acetate 1: 1) to yield, after drying in vacuo, the title compound as a yellow solid (130 mg, 66% yield). XH NMR (CDC13, 400 MHz): delta 0.81-0.91 (m, 3 H), 1.49-1.59 (m, 9 H), 1.67- 1.76 (m, 6 H), 2.08-2.22 (m, 1 H), 2.52-2.64 (m, 1 H), 2.76-2.87 (m, 3 H), 3.71-3.87 (m, 2 H), 5.21 (dd, / = 7.1, 11.0 Hz, 1 H), 7.37 (dd, / = 2.3, 8.8 Hz, 1 H), 7.48-7.57 (m, 1 H), 8.37 (d, / = 2.5 Hz, 1 H), 8.44 (dd, / = 3.0, 8.9 Hz, 1 H), 10.46 (s, 1 H), 11.00 (br s, 1 H). MS (ES+) mJz 563.2 [M+H] .

Statistics shows that 1256808-59-9 is playing an increasingly important role. we look forward to future research findings about 5-Fluoro-3-methylpicolinic acid.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; CUENI, Philipp; DOLENTE, Cosimo; GUBA, Wolfgang; HAAP, Wolfgang; KUGLSTATTER, Andreas; OBST SANDER, Ulrike; PETERS, Jens-Uwe; ROGERS-EVANS, Mark; VIFIAN, Walter; WOLTERING, Thomas; (231 pag.)WO2016/55496; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1256808-59-9, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1256808-59-9, name is 5-Fluoro-3-methylpicolinic acid, molecular formula is C7H6FNO2, molecular weight is 155.13, as common compound, the synthetic route is as follows.

To a solution of tert-butyl ((3aR,4R,8S)-4-(6-amino-3-fluoropyridin-2-yl)-4,7,7- trimethyl-8-oxido-3,3a,4,7-tetrahydro-2H-isothiazolo[l,5-a][l,4]thiazin-6-yl)carbamate (Int- 39BA, 150 mg, 0.35 mmol) in THF (20 mL) was added 5-fluoro-3-methylpicolinic acid (82 mg, 0.53 mmol) followed by T3P (1.1 g, 1.75 mmol, 50% in ethyl acetate), and diisopropylethylamine (267 mg, 2.1 mmol). The reaction was stirred at 70 C for 4 h. After that, the reaction mixture was diluted with aqueous saturated sodium hydrogencarbonate solution (20 mL) and extracted with ethyl acetate (3 x 30 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated to give a crude product. The crude was purified by column chromatography (silica gel, eluting with petroleum ether / ethyl acetate 1: 1) to yield, after drying in vacuo, the title compound as a yellow solid (130 mg, 66% yield). XH NMR (CDC13, 400 MHz): delta 0.81-0.91 (m, 3 H), 1.49-1.59 (m, 9 H), 1.67- 1.76 (m, 6 H), 2.08-2.22 (m, 1 H), 2.52-2.64 (m, 1 H), 2.76-2.87 (m, 3 H), 3.71-3.87 (m, 2 H), 5.21 (dd, / = 7.1, 11.0 Hz, 1 H), 7.37 (dd, / = 2.3, 8.8 Hz, 1 H), 7.48-7.57 (m, 1 H), 8.37 (d, / = 2.5 Hz, 1 H), 8.44 (dd, / = 3.0, 8.9 Hz, 1 H), 10.46 (s, 1 H), 11.00 (br s, 1 H). MS (ES+) mJz 563.2 [M+H] .

Statistics shows that 1256808-59-9 is playing an increasingly important role. we look forward to future research findings about 5-Fluoro-3-methylpicolinic acid.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; CUENI, Philipp; DOLENTE, Cosimo; GUBA, Wolfgang; HAAP, Wolfgang; KUGLSTATTER, Andreas; OBST SANDER, Ulrike; PETERS, Jens-Uwe; ROGERS-EVANS, Mark; VIFIAN, Walter; WOLTERING, Thomas; (231 pag.)WO2016/55496; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1256808-59-9, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1256808-59-9, name is 5-Fluoro-3-methylpicolinic acid, molecular formula is C7H6FNO2, molecular weight is 155.13, as common compound, the synthetic route is as follows.

To a solution of tert-butyl ((3aR,4R,8S)-4-(6-amino-3-fluoropyridin-2-yl)-4,7,7- trimethyl-8-oxido-3,3a,4,7-tetrahydro-2H-isothiazolo[l,5-a][l,4]thiazin-6-yl)carbamate (Int- 39BA, 150 mg, 0.35 mmol) in THF (20 mL) was added 5-fluoro-3-methylpicolinic acid (82 mg, 0.53 mmol) followed by T3P (1.1 g, 1.75 mmol, 50% in ethyl acetate), and diisopropylethylamine (267 mg, 2.1 mmol). The reaction was stirred at 70 C for 4 h. After that, the reaction mixture was diluted with aqueous saturated sodium hydrogencarbonate solution (20 mL) and extracted with ethyl acetate (3 x 30 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated to give a crude product. The crude was purified by column chromatography (silica gel, eluting with petroleum ether / ethyl acetate 1: 1) to yield, after drying in vacuo, the title compound as a yellow solid (130 mg, 66% yield). XH NMR (CDC13, 400 MHz): delta 0.81-0.91 (m, 3 H), 1.49-1.59 (m, 9 H), 1.67- 1.76 (m, 6 H), 2.08-2.22 (m, 1 H), 2.52-2.64 (m, 1 H), 2.76-2.87 (m, 3 H), 3.71-3.87 (m, 2 H), 5.21 (dd, / = 7.1, 11.0 Hz, 1 H), 7.37 (dd, / = 2.3, 8.8 Hz, 1 H), 7.48-7.57 (m, 1 H), 8.37 (d, / = 2.5 Hz, 1 H), 8.44 (dd, / = 3.0, 8.9 Hz, 1 H), 10.46 (s, 1 H), 11.00 (br s, 1 H). MS (ES+) mJz 563.2 [M+H] .

Statistics shows that 1256808-59-9 is playing an increasingly important role. we look forward to future research findings about 5-Fluoro-3-methylpicolinic acid.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; CUENI, Philipp; DOLENTE, Cosimo; GUBA, Wolfgang; HAAP, Wolfgang; KUGLSTATTER, Andreas; OBST SANDER, Ulrike; PETERS, Jens-Uwe; ROGERS-EVANS, Mark; VIFIAN, Walter; WOLTERING, Thomas; (231 pag.)WO2016/55496; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1256808-59-9 , The common heterocyclic compound, 1256808-59-9, name is 5-Fluoro-3-methylpicolinic acid, molecular formula is C7H6FNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of tert-butyl ((3aS,4R,8R)-4-(6-amino-3-fluoropyridin-2-yl)-4,7,7- trimethyl-8-oxido-3,3a,4,7-tetrahydro-2H-isothiazolo[l,5-a][l,4]thiazin-6-yl)carbamate (Int- 39AB, 150 mg, 0.35 mmol) in THF (20 mL) was added 5-fluoro-3-methylpicolinic acid (82 mg, 0.53 mmol) followed by T3P (1.1 g, 1.75 mmol, 50% in ethyl acetate), and diisopropylethylamine (267 mg, 2.1 mmol). The reaction was stirred at 70 C for 4 h. After that, the reaction mixture was diluted with aqueous saturated sodium hydrogencarbonate solution (20 mL) and extracted with ethyl acetate (3 x 30 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated to give a crude product. The crude was purified by column chromatography (silica gel, eluting with petroleum ether / ethyl acetate 1: 1) to yield, after drying in vacuo, the title compound as a yellow solid (130 mg, 66% yield). XH NMR (CDC13, 400 MHz): delta 1.50-1.59 (m, 1 H), 1.66 (s, 9 H), 1.86 (s, 3 H), 1.97 (s, 3 H), 2.06-2.12 (m, 1 H), 2.14 (s, 3 H), 2.84 (s, 3 H), 3.54 (dd, J = 7.7, 10.7 Hz, 1 H), 3.69 (ddd, J = 4.8, 10.7, 10.7 Hz, 1 H), 4.30 (ddd, / = 2.1, 7.1, 12.0 Hz, 1 H), 7.40 (dd, J = 2.1, 8.9 Hz, 1 H), 7.58 (dd, = 9.1, 10.0 Hz, 1 H), 8.31 (d, J = 2.6 Hz, 1 H), 8.49 (dd, / = 3.1, 8.9 Hz, 1 H), 10.78 (s, 1 H), 12.54 (s, 1 H). MS (ES+) m/z 563.2 [M+H].

The synthetic route of 1256808-59-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; CUENI, Philipp; DOLENTE, Cosimo; GUBA, Wolfgang; HAAP, Wolfgang; KUGLSTATTER, Andreas; OBST SANDER, Ulrike; PETERS, Jens-Uwe; ROGERS-EVANS, Mark; VIFIAN, Walter; WOLTERING, Thomas; (231 pag.)WO2016/55496; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1256808-59-9 , The common heterocyclic compound, 1256808-59-9, name is 5-Fluoro-3-methylpicolinic acid, molecular formula is C7H6FNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of tert-butyl ((3aS,4R,8R)-4-(6-amino-3-fluoropyridin-2-yl)-4,7,7- trimethyl-8-oxido-3,3a,4,7-tetrahydro-2H-isothiazolo[l,5-a][l,4]thiazin-6-yl)carbamate (Int- 39AB, 150 mg, 0.35 mmol) in THF (20 mL) was added 5-fluoro-3-methylpicolinic acid (82 mg, 0.53 mmol) followed by T3P (1.1 g, 1.75 mmol, 50% in ethyl acetate), and diisopropylethylamine (267 mg, 2.1 mmol). The reaction was stirred at 70 C for 4 h. After that, the reaction mixture was diluted with aqueous saturated sodium hydrogencarbonate solution (20 mL) and extracted with ethyl acetate (3 x 30 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated to give a crude product. The crude was purified by column chromatography (silica gel, eluting with petroleum ether / ethyl acetate 1: 1) to yield, after drying in vacuo, the title compound as a yellow solid (130 mg, 66% yield). XH NMR (CDC13, 400 MHz): delta 1.50-1.59 (m, 1 H), 1.66 (s, 9 H), 1.86 (s, 3 H), 1.97 (s, 3 H), 2.06-2.12 (m, 1 H), 2.14 (s, 3 H), 2.84 (s, 3 H), 3.54 (dd, J = 7.7, 10.7 Hz, 1 H), 3.69 (ddd, J = 4.8, 10.7, 10.7 Hz, 1 H), 4.30 (ddd, / = 2.1, 7.1, 12.0 Hz, 1 H), 7.40 (dd, J = 2.1, 8.9 Hz, 1 H), 7.58 (dd, = 9.1, 10.0 Hz, 1 H), 8.31 (d, J = 2.6 Hz, 1 H), 8.49 (dd, / = 3.1, 8.9 Hz, 1 H), 10.78 (s, 1 H), 12.54 (s, 1 H). MS (ES+) m/z 563.2 [M+H].

The synthetic route of 1256808-59-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BARTELS, Bjoern; CUENI, Philipp; DOLENTE, Cosimo; GUBA, Wolfgang; HAAP, Wolfgang; KUGLSTATTER, Andreas; OBST SANDER, Ulrike; PETERS, Jens-Uwe; ROGERS-EVANS, Mark; VIFIAN, Walter; WOLTERING, Thomas; (231 pag.)WO2016/55496; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 1256808-59-9, name is 5-Fluoro-3-methylpicolinic acid. This compound has unique chemical properties. The synthetic route is as follows. Formula: C7H6FNO2

Example 49 N-(3-((2R,5S)-6-amino-3,3,5-trifluoro-2,5-dimethyl-2,3,4,5-tetrahydropyridin-2-yl)-4-fluorophenyl)-5-fluoro-3-methylpicolinamide Prepared from (3S,6R)-6-(5-amino-2-fluorophenyl)-3,5,5-trifluoro-3,6-dimethylpiperidine-2-thione and 5-fluoro-3-methylpicolinic acid LC-MS (m/z) 427.1 (MH+) tR=0.54 minutes (Method A) 1H NMR (600 MHz, DMSO-d6) delta 10.51 (s, 1H), 8.53 (dd, J=2.7, 0.4 Hz, 1H), 7.89-7.84 (m, 1H), 7.81 (ddd, J=9.8, 2.7, 0.6 Hz, 1H), 7.75 (dd, J=7.2, 2.7 Hz, 1H), 7.12 (dd, J=12.0, 8.8 Hz, 1H), 6.22 (s, 2H), 2.75-2.61 (m, 1H), 2.58 (s, 3H), 2.49-2.37 (m, 1H), 1.67 (d, J=22.7 Hz, 3H), 1.62 (s, 3H)

With the rapid development of chemical substances, we look forward to future research findings about 1256808-59-9.

Reference:
Patent; H. LUNDBECK A/S; Juhl, Karsten; Marigo, Mauro; Tagmose, Lena; Jensen, Thomas; US2015/232449; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 1256808-59-9 ,Some common heterocyclic compound, 1256808-59-9, molecular formula is C7H6FNO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 5-fluoro-3-methylpicolinic acid (40.0 mg, 258 mumol, Eq: 1.2) in methanol (3.00 ml) was added at 0 C 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) (83.3 mg, 301 mumol, Eq: 1.4), the colorless solution was stirred at 0 C for 30 min, then a solution of (3R,4aS)-3-(5-amino-2-fluoro-phenyl)-3-methyl-4a-oxo-3,4,6,7,8,9-hexahydro-4alambda6-thia-2,5,9a-triaza-benzocyclohepten-1-ylamine (70 mg, 215 mumol, Eq: 1.00) in methanol (5.00 ml) was added dropwise via syringe and the reaction mixture was stirred at 23 C for 4 h. Extracted with ethyl acetate and sat. NaHCO3-sol. plus brine, dried organic layer over Na2SO4. Filtration and removal of the solvent in vacuum left a brown foam which was purified by flash chromatography (NH2-silica gel, 20 g, 0% to 100% EtOAc in heptane) to give the 5-fluoro-3-methyl-pyridine-2-carboxylic acid [3-((3R,4aS)-1-amino-3-methyl-4a-oxo-3,4,6,7,8,9-hexahydro-4alambda6-thia-2,5,9a-triaza-benzocyclohepten-3-yl)-4-fluoro-phenyl]-amide (29 mg, 62.7 mumol, 29.1 % yield) as a white solid. MS (ISP): m/z = 463.2 [(M+H)+]

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 1256808-59-9, 5-Fluoro-3-methylpicolinic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; GUBA, Wolfgang; HAAP, Wolfgang; KUGLSTATTER, Andreas; PETERS, Jens-Uwe; OBST SANDER, Ulrike; SCHNIDER, Christian; WERMUTH, Roger; WOLTERING, Thomas; WO2015/91595; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem