Share a compound : 1374639-78-7

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1374639-78-7, tert-Butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3-d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-1-carboxylate, and friends who are interested can also refer to it.

Adding a certain compound to certain chemical reactions, such as: 1374639-78-7, tert-Butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3-d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-1-carboxylate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Application In Synthesis of tert-Butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3-d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-1-carboxylate, blongs to pyridine-derivatives compound. Application In Synthesis of tert-Butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3-d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-1-carboxylate

To the solution of tert-butyl 4-(6- { [7-cyclopentyl-6-(dimethylcarbamoyl)-7H- pyrrolo[2, 3 -d]pyrimidin-2-yl] amino } pyridin-3 -yl)piperazine- 1 -carboxylate (6.0 g)in 15 ml of DCM was added TFA (15 ml) at 5-10C. The solution was stirred over3-4 hrs at 20-30C. To this was added methyl tertiary butyl ether (60 ml) and stirred for 2-3 hrs at 15-25C. The solid was collected by filtration followed by drying at 40-50C to give crystalline form I of 4-(6-{[7-cyclopentyl-6- (dimethylcarbamoyl)-7H-pyrrolo[2,3 -d]pyrimidin-2-yl] amino } pyridin-3 -yl)piperazin- 1 -ium-trifluoro acetate (100 g).Yield: 99.0 %; HPLC Purity: 99.8%

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1374639-78-7, tert-Butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3-d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-1-carboxylate, and friends who are interested can also refer to it.

Reference:
Patent; FRESENIUS KABI ONCOLOGY LTD.; SOKHI, Sarbjot Singh; SINGH, Govind; LAHIRI, Saswata; PANDEY, Maneesh Kumar; TIWARI, Raj Narayan; SHUKLA, Sonu; MUSMADE, Sachin; DUA, Heena; CABRI, Walter; (70 pag.)WO2019/82143; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Introduction of a new synthetic route about tert-Butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3-d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-1-carboxylate

The chemical industry reduces the impact on the environment during synthesis 1374639-78-7, I believe this compound will play a more active role in future production and life.

Electric Literature of 1374639-78-7, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1374639-78-7, name is tert-Butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3-d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-1-carboxylate, molecular formula is C28H38N8O3, molecular weight is 534.65, as common compound, the synthetic route is as follows.

In a nitrogen environment at about 25±2 C., mix 2-chloro-7-cyclopentyl-N,N-dimethyl-7H-pyrrolo[2,3-d]pyrimidine-6-carbamide and 4-(6-aminopyyrol-3-yl)piperazin-1-carboxyl tert-butylate into tetrahydrofuran THF) added with lithium bis(trimethyl)amine (LiHMDS) and stir for about 1 h to obtain the intermediate 4-[6-[[7-cyclopentyl-6-[(dimethylamino)carbonyl]-7H-pyrrolo[2,3-pyrimidine-2-yl]amino]-3-pyridine]-1-piperazinecarboxyl 1,1-dimethylethylate. Cool the mixture to about 8±2 C. and keep the mixture at this temperature while an aqueous hydrogen chloride solution is subsequently added slowly and mixed into the mixture. After that, using a separatory funnel and ethyl acetate as an extracting agent, perform an extraction process in duplicate to acquire the aqueous phase. When the extracted solution is cooled to about 5 C. or lower, slowly add an aqueous sodium hydroxide solution until the pH reaches 12.5. Heat the solution to 25 C. and stir for about 16 h. Next, filter the solution to obtain the solid matter (or filter cake), and rinse the filter cake with DD water until the pH of the rinsing liquid is equal to or lower than 9. Lastly, dry the filter cake at about 55±5 C. to yield yellowish brown solids, which are 7-cyclopentyl-N,N-dimethyl-2-{[5-(piperazin-1-yl)pyridin-2-yl]amino}-7H-pyrrolo[2,3-d]pyrimidine-6-carboxamide, whose molar recovery rate can be 98% or higher, with 98% or higher purity.

The chemical industry reduces the impact on the environment during synthesis 1374639-78-7, I believe this compound will play a more active role in future production and life.

Reference:
Patent; CHUNGHWA CHEMICAL SYNTHESIS & BIOTECH CO. LTD.; Kamani, Satyanarayana; Lu, Tzu-Chiang; Chang, Hsin-Yun; Mai, Chin-Cheng; (30 pag.)US10336763; (2019); B1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Brief introduction of 1374639-78-7

With the rapid development of chemical substances, we look forward to future research findings about 1374639-78-7.

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 1374639-78-7, name is tert-Butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3-d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-1-carboxylate, molecular formula is C28H38N8O3, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. HPLC of Formula: C28H38N8O3

A solution of tert-butyl 4-(6-((7-cyclopentyl-6-(dimethylcarbamoyl)-7H-pyrrolo[2,3- d]pyrimidin-2-yl)amino)pyridin-3-yl)piperazine-l-carboxylate (Ila) (50 g) in toluene (300 mL) was cooled to 10 C. Hydrochloric acid (6N, 100 mL) was added to the above solution in drop wise at 15 C. The reaction mass was stirred for 1 hour at 25-30 C. Hydrochloric acid (IN, 200 mL) was added to the above reaction mass at 25-30 C and stirred for 10 minutes at the same temperature. The reaction mass was then filtered and washed with toluene (1 x 50 mL) followed by hydrochloric acid (IN, 50 mL). Organic layer was separated and aqueous layer was cooled to 15 C. pH of aqueous layer was adjusted to pH=12.0-12.5 using saturated solution of sodium hydroxide (50% w/w) and stirred for 1 hour at 15-20 C. The resulted precipitate was then filtered, washed with water (3 chi 80 mL) and dried at 50 C for 6 hours to provide the title compound. (0169) Yield: 35.1 g; Purity by HPLC: 99.31 %

With the rapid development of chemical substances, we look forward to future research findings about 1374639-78-7.

Reference:
Patent; DR. REDDY?S LABORATORIES LIMITED; PEDDIREDDY, Subba Reddy; KOTTUR, Mohan Kumar; ORUGANTI, Srinivas; KANDAGATLA, Bhaskar; DAS GUPTA, Shirshendu; (39 pag.)WO2018/51280; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem