Analyzing the synthesis route of tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate

The synthetic route of 153747-97-8 has been constantly updated, and we look forward to future research findings.

Electric Literature of 153747-97-8 , The common heterocyclic compound, 153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate, molecular formula is C14H20BrN3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A mixture of 1-11 (4.30 g, 12.57 mmol) , bis (pinacolato) diboron (3.82 g 15.07 mmol) and KOAc (2.94 g, 37.69 mmol) in 1,4-dioxane (30 mL) was degassed in a stream of argon for 15 minutes. To the mixture was added 1,1- bis (diphenylphosphino) ferrocene-palladium(II) dichloride dichloromethane complex (0.307 g, 0.376 mmol), and the reaction mixture was again degassed for additional 15 minutes. After stirring at 100C for 20 hours, the volatiles were removed by evaporation, and the obtained residue was diluted with water (50 mL) , followed by extraction with ethyl acetate (50 mL x 3) . The combined organic layers were washed with brine (50 mL) , dried over anhydrous Na2SC> and concentrated under reduced pressure. The obtained residue was purified by silica gel column chromatography (100-200 mesh) using 50% EtOAc in hexanes to give the desired product Intermediate 1- XIII as a mixture of minor boronate ester together with major boronic acid . (4.8 g, crude yield 98%) as a yellow solid; LCMS (for boronate ester) : m/z 390.2 [M+l]; LCMS (for boronic acid) : m/z 308.1 [M+l] .

The synthetic route of 153747-97-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; KOUL, Summon; KURHADE, Suresh; BHOSALE, Sandeep; NAIK, Keshav; SALUNKHE, Videsh; MUNOT, Yogesh; BHUNIYA, Debnath; (284 pag.)WO2015/88045; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

The origin of a common compound about tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate

With the rapid development of chemical substances, we look forward to future research findings about 153747-97-8.

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate, molecular formula is C14H20BrN3O2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Recommanded Product: 153747-97-8

To a stirred solution of tert-butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate (10 g, 29.21 mmol) in 1,4-dioxane (5OmL), 4N HCI solution in dioxane (100 mL, IOV) was added and the mixture was stirred 4 h at rt. The white precipitate formed was filtered and residuewas washed with diethyl ether (25 mL) to afford the title compound. Yield: 95.2% (9 g, off white solid). 1H NMR (400 MHz, DMSO-d6): 6 10.05 (br s, 2H), 8.21 (d, J = 2.4 Hz, IH), 7.82 (dd, J = 9.2, 2.4 Hz, IH), 6.99 (d, J = 9.2 Hz, IH), 3.80-3.77 (m, 4H), 3.33-3.13 (m, 4H). LCMS: (Method A) 243.9 (M +2H), Rt. 1.69 mm, 99.3 % (Max).

With the rapid development of chemical substances, we look forward to future research findings about 153747-97-8.

Reference:
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; KULKARNI, Santosh, S.; GIRI, Awadut, Gajendra; (280 pag.)WO2017/144633; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

The origin of a common compound about tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate

With the rapid development of chemical substances, we look forward to future research findings about 153747-97-8.

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate, molecular formula is C14H20BrN3O2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Recommanded Product: 153747-97-8

To a stirred solution of tert-butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate (10 g, 29.21 mmol) in 1,4-dioxane (5OmL), 4N HCI solution in dioxane (100 mL, IOV) was added and the mixture was stirred 4 h at rt. The white precipitate formed was filtered and residuewas washed with diethyl ether (25 mL) to afford the title compound. Yield: 95.2% (9 g, off white solid). 1H NMR (400 MHz, DMSO-d6): 6 10.05 (br s, 2H), 8.21 (d, J = 2.4 Hz, IH), 7.82 (dd, J = 9.2, 2.4 Hz, IH), 6.99 (d, J = 9.2 Hz, IH), 3.80-3.77 (m, 4H), 3.33-3.13 (m, 4H). LCMS: (Method A) 243.9 (M +2H), Rt. 1.69 mm, 99.3 % (Max).

With the rapid development of chemical substances, we look forward to future research findings about 153747-97-8.

Reference:
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; KULKARNI, Santosh, S.; GIRI, Awadut, Gajendra; (280 pag.)WO2017/144633; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

The origin of a common compound about tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate

With the rapid development of chemical substances, we look forward to future research findings about 153747-97-8.

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate, molecular formula is C14H20BrN3O2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. Recommanded Product: 153747-97-8

To a stirred solution of tert-butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate (10 g, 29.21 mmol) in 1,4-dioxane (5OmL), 4N HCI solution in dioxane (100 mL, IOV) was added and the mixture was stirred 4 h at rt. The white precipitate formed was filtered and residuewas washed with diethyl ether (25 mL) to afford the title compound. Yield: 95.2% (9 g, off white solid). 1H NMR (400 MHz, DMSO-d6): 6 10.05 (br s, 2H), 8.21 (d, J = 2.4 Hz, IH), 7.82 (dd, J = 9.2, 2.4 Hz, IH), 6.99 (d, J = 9.2 Hz, IH), 3.80-3.77 (m, 4H), 3.33-3.13 (m, 4H). LCMS: (Method A) 243.9 (M +2H), Rt. 1.69 mm, 99.3 % (Max).

With the rapid development of chemical substances, we look forward to future research findings about 153747-97-8.

Reference:
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; KULKARNI, Santosh, S.; GIRI, Awadut, Gajendra; (280 pag.)WO2017/144633; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Brief introduction of tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate

The chemical industry reduces the impact on the environment during synthesis 153747-97-8, I believe this compound will play a more active role in future production and life.

Related Products of 153747-97-8, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate, molecular formula is C14H20BrN3O2, molecular weight is 342.23, as common compound, the synthetic route is as follows.

3.2.; 1-(5-bromo-2-pyridyl)piperazine 49 ml (272 mmol) of a solution of hydrochloric acid (6N) in isopropanol are added at room temperature to a solution of 18.60 g (54.40 mmol) of 1,1-dimethyl-ethyl 4-(5-bromo-2-pyridyl)-1-piperazinecarboxylate, obtained in step 3.1., in 100 ml of 1.4-dioxane. The reaction mixture is then maintained at about 60 C. for 3 hours. The mixture is concentrated to dryness under reduced pressure. The dihydrochloride obtained is taken up in 200 ml of dichloromethane and 200 ml of water, followed by portionwise addition, with stirring, of 10 g of sodium hydrogen carbonate. The phases are separated by settling, the aqueous phase is extracted twice with dichloromethane, and the combined organic phases are washed with saturated aqueous sodium chloride solution, dried over sodium sulfate and concentrated under reduced pressure. 12 g of product are obtained in the form of a white solid. m.p. ( C.): 72 C.

The chemical industry reduces the impact on the environment during synthesis 153747-97-8, I believe this compound will play a more active role in future production and life.

Reference:
Patent; SANOFI-AVENTIS; US2006/293310; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Some tips on 153747-97-8

The chemical industry reduces the impact on the environment during synthesis 153747-97-8, I believe this compound will play a more active role in future production and life.

Synthetic Route of 153747-97-8, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate, molecular formula is C14H20BrN3O2, molecular weight is 342.23, as common compound, the synthetic route is as follows.

Triflurooacetaldehyde hydrate (1.7 g, 14.6 mmol) was added dropwise into a stirred mixture consisting of phosphorus pentoxide (I g, 7.3 mmol) and 4 mL of concentrated sulfuric acid at 95 0C. The freshly produced gaseous trifluororacetaldehyde was trapped with a dry ice-filled cold finger and dripped into a THF solution of tert-butyl 4-(5- bromopyridin-2-yl)piperazine-l-carboxylate (I g, 2.92 mmol) with 2.5 M n-butyllithium in hexanes (1.3 mL, 3.2 mmol) at -78 0C under nitrogen atmosphere. After addition, the reaction mixture was warmed to room temperature and stirred for 2 h. The mixture was quenched with saturated ammonium chloride aqueous solution at -78 0C and the mixture was partitioned between DCM and brine. The organic layer was dried over Na2SO4 and concentrated to afford a brown solid. The crude material was purified by flash chromatography on silica gel, eluting with 10 – 80% EtOAc: heptane. Fractions containing the desired product were combined and concentrated to afford yellow sticky solid (450 mg, 42.6% yield). The Boc protected titled compound (380 mg, 1.1 mmol) was stirred in 20% TFA in DCM (5 mL) for 10 min. The reaction mixture was concentrated to afford the titled product as a TFA salt (260 mg, yield 95%). MS (m/z, MH+): meas. 262.2 calc. 262.25

The chemical industry reduces the impact on the environment during synthesis 153747-97-8, I believe this compound will play a more active role in future production and life.

Reference:
Patent; NOVARTIS AG; WO2008/110611; (2008); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

A new synthetic route of tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 153747-97-8, tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate.

Related Products of 153747-97-8, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate. This compound has unique chemical properties. The synthetic route is as follows.

A mixture of tert- Butyl 4-(5-bromo-2-pyridinyl)-l-piperazinecarboxylate (0.203 g, 0.593 mmol) and7V-({(55)- 3-[3-fluoro-4-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2-yl)phenyl]-2-oxo-l,3-oxazolidin-5- yl}methyl)acetamide (0.270 g, 0.714 mmol) in dmf (4 niL), EtOH (1.5 niL), toluene (2.5 mL) and K2CO3 (1 mL, 2 M, 2 mmol) was purged with nitrogen. PdCl2(dppf) (24 mg, 0.03 mmol) was added and the mixture was heated to 900C under nitrogen for 1 h, then partitioned between EtOAc and water. Column chromatography (EtOAc) gave the titled compound (0.21O g, 69%) as a white solid. APCI MS m/z 514 (M + H). 1H NMR (400 MHz, DMSO-J6) delta 8.32 (bs, IH), 8.27 (t, J= 5.9 Hz, IH), 7.75 (ddd, J- 8.9, 2.4, 1.7 Hz, IH), 7.53-7.60 (m, 2H), 7.38 (dd, J- 8.6, 2.2 Hz, IH), 6.94 (d, J= 8.9 Hz, IH), 4.72-4.79 (m, IH), 4.15 (t, J= 9.1 Hz, IH), 3.77 (dd, J = 9.2, 6.5 Hz, IH), 3.52-3.57 (m, 4H), 3.40-3.46 (m, 6H), 1.84 (s, 3H), 1.43 (s, 9H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 153747-97-8, tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate.

Reference:
Patent; GLOBAL ALLIANCE FOR TB DRUG DEVELOPMENT; WO2009/120789; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Brief introduction of 153747-97-8

The synthetic route of 153747-97-8 has been constantly updated, and we look forward to future research findings.

Synthetic Route of 153747-97-8 , The common heterocyclic compound, 153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate, molecular formula is C14H20BrN3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Under nitrogen protection,Tert-butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate (2.0 g, 5.84 mmol),Bis(boronic acid) pinacol ester (2.2 g, 8.77 mmol) andPotassium acetate (1.72 g, 17.53 mmol)To a solution of dimethyl sulfoxide (10 mL) was added Pd(dppf)Cl2.CH2Cl2 (473.0 mg, 0.58 mmol).The reaction was heated to 80C and stirred for 2 hours.Cool toDiluted with ethyl acetate (100 mL) at room temperature and filtered through celite. The filtrate was washed with saturated brine (100 mL x 4), anhydrousSodium sulfate was dried and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel (PE/EtOAc (v/v) = 3/1) to give the title compoundThe product was an off-white solid (2.55 g, 112%).

The synthetic route of 153747-97-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jiatuo Sciences Corporation; Xi Ning; Wang Liang; Wang Tingjin; (104 pag.)CN104650049; (2018); B;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

New downstream synthetic route of 153747-97-8

According to the analysis of related databases, 153747-97-8, the application of this compound in the production field has become more and more popular.

Electric Literature of 153747-97-8, Adding some certain compound to certain chemical reactions, such as: 153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate,molecular formula is C14H20BrN3O2, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 153747-97-8.

[0951] A solution ofcompound 90b (125 g, 366 mmol) inDMF (1.30 L)was treatedwith, 4,4,4′,4′,5,5,5′,5′-octamethyl2,2′-bi(1,3,2-dioxaborolane) (186 g, 732 mmol), Pd(OAc) 2(4.09 g, 18.3 mmol), PPh3 (19.2 g, 73.2 mmol) and KOAc(108 g, 1.10 mol) under a nitrogen atmosphere. The resultingmixture was stirred overnight at 80 C. Upon cooling to roomtemperature, the solids were collected by filtration. The filtrate was concentratedunderreduced pressure, and the resultant residue was purified by flash colunm chromatography onsilica gel (EtOAc/petroleum ether (1 :50 v/v)) to obtain compound 90c as a white solid (80.0 g, 56% yield). Mass Spectrum (LCMS, ESI pos.): Calcd. for C20H32BN3 0 4 : 390.2(M+H). found 390.2.

According to the analysis of related databases, 153747-97-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA, NV; Player, Mark R.; Meegalla, Sanath K.; Illig, Carl R.; Chen, Jinsheng; Wilson, Kenneth J.; Lee, Yu-Kai; Parks, Daniel J.; Huang, Hui; Patel, Sharmila; Lu, Tianbao; US2014/364414; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Analyzing the synthesis route of 153747-97-8

Statistics shows that 153747-97-8 is playing an increasingly important role. we look forward to future research findings about tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate.

Reference of 153747-97-8, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.153747-97-8, name is tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate, molecular formula is C14H20BrN3O2, molecular weight is 342.23, as common compound, the synthetic route is as follows.

Under nitrogen protection,Tert-butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate (202 mg, 0.59 mmol),N,N-bis(tert-butoxycarbonyl)-3-(1-(2,5-dichlorophenyl)ethoxy)-5-(4,4,5,5-tetramethyl-1,3) ,2-Dioxaborolan-2-yl)pyridin-2-amine (300 mg, 0.49 mmol) andCesium carbonate (320mg, 0.98mmol)Ethylene glycol dimethyl ether/water (10 mL/1 mL)Pd(dppf)Cl2.CH2Cl2 (40 mg, 0.05 mmol) was added to the mixture.The reaction solution is heated to 90C.After stirring overnight, cool to room temperature and filter through celite. The filtrate was concentrated under reduced pressure, and the resulting residue was purified by column chromatography on silica gel (PE/EtOAc (v/v) = 5/1) to give the title compound as a yellow oil (250 mg, 68%).

Statistics shows that 153747-97-8 is playing an increasingly important role. we look forward to future research findings about tert-Butyl 4-(5-bromopyridin-2-yl)piperazine-1-carboxylate.

Reference:
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Jiatuo Sciences Corporation; Xi Ning; Wang Liang; Wang Tingjin; (104 pag.)CN104650049; (2018); B;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem