Category: 22282-96-8

Adding a certain compound to certain chemical reactions, such as: 22282-96-8, 2-Bromo-6-methyl-5-nitropyridine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 22282-96-8, blongs to pyridine-derivatives compound. Product Details of 22282-96-8

To a stirred solution of 6-bromo-2-methyl-3-nitropyridine (15 g, 69.12 mmol) in ethanol (280 mL) was added iron powder (57.9 g, 1036 mmol) followed by conc HCl (30 mL). The reaction mixture was stirred for 6 h at 100 C., after completion of reaction (monitored by TLC), reaction mixture was cooled to room temperature, filtered through celite. Filterate was basified with saturated NaHCO3 solution, extracted with EtOAc. Organic layer was washed with water followed by brine, dried over anhydrous sodium sulphate, filtered and concentrated under reduced pressure. The crude product was used in next step without further purification to afford desired compound (5.6 g, 65%) as an off-white solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,22282-96-8, its application will become more common.

Reference:
Patent; Eisai R&D Management Co., Ltd.; BOCK, Mark; HAO, Ming-Hong; KORPAL, Manav; NYAVANANDI, Vijay Kumar; PUYANG, Xiaoling; SAMAJDAR, Susanta; SMITH, Peter Gerard; WANG, John; ZHENG, Guo Zhu; ZHU, Ping; (141 pag.)US2016/347717; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 22282-96-8, name is 2-Bromo-6-methyl-5-nitropyridine. A new synthetic method of this compound is introduced below., Formula: C6H5BrN2O2

A suspension of 6-bromo-2-methyl-3-nitropyridine (XIV) (250 g, 1.15 mol, 1.00 eq) and NH4C1 (300 g, 5.61 mol, 4.88 eq) in EtOH (3.50 L) and water (150 mL) was heated with stirring to 65C. To this mixture was added Fe (130 g, 2.33 mol, 2.02 eq) and HQ (15.3 g, 419 mmol, 0.36 eq). The suspension was then heated to 80C for another 3 h. The reaction was cooled to 25C and filtered through a plug of Celite. The filtrate was concentrated under reduced pressure to yield a residue that was taken up in EtOAc (1 L x 3) and washed with brine. The organic layer was dried over sodium sulfate, filtered and concentrated under reduced pressure to give 6- bromo-2-methylpyridin-3-amine (XV) as brown solid (373 g, 1.99 mol, 86.7% yield) which was used for the next step without any purification. NMR (DMSO-de, 400 MHz) delta ppm 6.01 (dd, J = 2.3, 7.9 Hz, 2H), 7.03 (d, J= 8.2 Hz, IH); ESIMS found for C6H7BrN2 mlz 186.8 (M+H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 22282-96-8, 2-Bromo-6-methyl-5-nitropyridine.

Reference:
Patent; KC, Sunil Kumar; WALLACE, David Mark; CAO, Jianguo; CHIRUTA, Chandramouli; HOOD, John; (230 pag.)WO2017/24025; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 22282-96-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 22282-96-8, name is 2-Bromo-6-methyl-5-nitropyridine, molecular formula is C6H5BrN2O2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A suspension of 6-bromo-2-methyl-3-nitropyridine (XIV) (250 g, 1.15 mol, 1.00 eq) and NH4C1 (300 g, 5.61 mol, 4.88 eq) in EtOH (3.50 L) and water (150 mL) was heated with stirring to 65C. To this mixture was added Fe (130 g, 2.33 mol, 2.02 eq) and HC1 (15.3 g, 419 mmol, 0.36 eq). The suspension was then heated to 80C for another 3 h. The reaction was cooled to 25C and filtered through a plug of Celite. The filtrate was concentrated under reduced pressure to yield a residue that was taken up in EtOAc (1 L x 3) and washed with brine. The organic layer was dried over sodium sulfate, filtered and concentrated under reduced pressure to give 6-bromo-2-methylpyridin-3-amine (XV) as brown solid (373 g, 1.99 mol, 86.7% yield) which was used for the next step without any purification. l NMR (DMSO- tf, 400 MHz) delta ppm 6.01 (dd, J = 2.3, 7.9 Hz, 2H), 7.03 (d, J = 8.2 Hz, 1H); ESIMS found for C6H7BrN2 mlz 186.8 (M+H).

According to the analysis of related databases, 22282-96-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SAMUMED, LLC.; KC, Sunil Kumar; WALLACE, David Mark; CAO, Jianguo; CHIRUTA, Chandramouli; HOOD, John; (247 pag.)WO2017/24004; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 22282-96-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 22282-96-8, name is 2-Bromo-6-methyl-5-nitropyridine, molecular formula is C6H5BrN2O2, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A suspension of 6-bromo-2-methyl-3-nitropyridine (XIV) (250 g, 1.15 mol, 1.00 eq) and NH4C1 (300 g, 5.61 mol, 4.88 eq) in EtOH (3.50 L) and water (150 mL) was heated with stirring to 65C. To this mixture was added Fe (130 g, 2.33 mol, 2.02 eq) and HC1 (15.3 g, 419 mmol, 0.36 eq). The suspension was then heated to 80C for another 3 h. The reaction was cooled to 25C and filtered through a plug of Celite. The filtrate was concentrated under reduced pressure to yield a residue that was taken up in EtOAc (1 L x 3) and washed with brine. The organic layer was dried over sodium sulfate, filtered and concentrated under reduced pressure to give 6-bromo-2-methylpyridin-3-amine (XV) as brown solid (373 g, 1.99 mol, 86.7% yield) which was used for the next step without any purification. l NMR (DMSO- tf, 400 MHz) delta ppm 6.01 (dd, J = 2.3, 7.9 Hz, 2H), 7.03 (d, J = 8.2 Hz, 1H); ESIMS found for C6H7BrN2 mlz 186.8 (M+H).

According to the analysis of related databases, 22282-96-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SAMUMED, LLC.; KC, Sunil Kumar; WALLACE, David Mark; CAO, Jianguo; CHIRUTA, Chandramouli; HOOD, John; (247 pag.)WO2017/24004; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 22282-96-8 , The common heterocyclic compound, 22282-96-8, name is 2-Bromo-6-methyl-5-nitropyridine, molecular formula is C6H5BrN2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

A suspension of 6-bromo-2-methyl-3-nitropyridine (XIV) (250 g, 1.15 mol, 1.00 eq) and NH4C1 (300 g, 5.61 mol, 4.88 eq) in EtOH (3.50 L) and water (150 mL) was heated with stirring to 65C. To this mixture was added Fe (130 g, 2.33 mol, 2.02 eq) and HQ (15.3 g, 419 mmol, 0.36 eq). The suspension was then heated to 80C for another 3 h. The reaction was cooled to 25C and filtered through a plug of Celite. The filtrate was concentrated under reduced pressure to yield a residue that was taken up in EtOAc (1 L x 3) and washed with brine. The organic layer was dried over sodium sulfate, filtered and concentrated under reduced pressure to give 6-bromo-2-methylpyridin-3-amine (XV) as brown solid (373 g, 1.99 mol, 86.7% yield) which was used for the next step without any purification. NMR (DMSO- e, 400 MHz) delta ppm 6.01 (dd, J = 2.3, 7.9 Hz, 2H), 7.03 (d, J = 8.2 Hz, 1H); ESIMS found for C6H7BrN2 mlz 186.8 (M+H).

The synthetic route of 22282-96-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SAMUMED, LLC; KC, Sunil Kumar; WALLACE, David Mark; CAO, Jianguo; CHIRUTA, Chandramouli; HOOD, John; (251 pag.)WO2017/24003; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 22282-96-8, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 22282-96-8, name is 2-Bromo-6-methyl-5-nitropyridine. This compound has unique chemical properties. The synthetic route is as follows.

A suspension of 6-bromo-2-methyl-3-nitropyridine (XIV) (250 g, 1.15 mol, 1.00 eq) and NH4C1 (300 g, 5.61 mol, 4.88 eq) in EtOH (3.50 L) and water (150 mL) was heated with stirring to 65C. To this mixture was added Fe (130 g, 2.33 mol, 2.02 eq) and HC1 (15.3 g, 419 mmol, 0.36 eq). The suspension was then heated to 80C for another 3 h. The reaction was cooled to 25C and filtered through a plug of Celite. The filtrate was concentrated under reduced pressure to yield a residue that was taken up in EtOAc (1 L x 3) and washed with brine. The organic layer was dried over sodium sulfate, filtered and concentrated under reduced pressure to give 6-bromo-2-methylpyridin-3-amine (XV) as brown solid (373 g, 1.99 mol, 86.7% yield) which was used for the next step without any purification. ?H NMR (DM50-cl6, 400 MHz) ppm 6.01 (dd, J= 2.3, 7.9 Hz, 2H), 7.03 (d, J= 8.2 Hz, 1H); ESIMS found for C6H7BrN2 mlz 186.8 (M+H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 22282-96-8, 2-Bromo-6-methyl-5-nitropyridine.

Reference:
Patent; SAMUMED, LLC.; KC, Sunil Kumar; WALLACE, David Mark; CAO, Jianguo; CHIRUTA, Chandramouli; HOOD, John; (254 pag.)WO2017/23993; (2017); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem