Category: 3430-26-0

Reference of 3430-26-0, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.3430-26-0, name is 2,5-Dibromo-4-methylpyridine, molecular formula is C6H5Br2N, molecular weight is 250.92, as common compound, the synthetic route is as follows.

To a solution of 2,5-dibromo-4-methylpyridine (20.00 g, 80.00 mmol) in acetonitrile (350 mL) was added sodium iodide (24.00 g, 160.0 mmol) and acetyl chloride (4.70 g, 59.9 mmol) at 0C under N2 in a 500 mL round bottom flask. The mixture was heated to 90C and stirred for 16 h. LC-MS showed the reaction was complete. The mixture was filtered, the precipitate was dissolved with DCM (50 mL) and water (50 mL), the organic layer was washed with water (30 mL x 2), dried over Na2SO4 and filtered. The filtrate was concentrated in vacuo to give the title compound, which was used directly for next step without further purification.1H NMR (CDCl3, 400 MHz): 8.39 (s, 1H), 7.60 (s, 1H), 2.33 (s, 3H). MS (ESI) m/z 297.8/299.8 (M+H).

The chemical industry reduces the impact on the environment during synthesis 3430-26-0, I believe this compound will play a more active role in future production and life.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SHEN, Dong-Ming; KUANG, Rongze; KUMAR, Puneet; DUFFY, Joseph, L.; ZHU, Cheng; ALI, Amjad; YANG, Meng; DEBENHAM, John, S.; (124 pag.)WO2018/39094; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 3430-26-0, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.3430-26-0, name is 2,5-Dibromo-4-methylpyridine, molecular formula is C6H5Br2N, molecular weight is 250.92, as common compound, the synthetic route is as follows.

To a solution of 2,5-dibromo-4-methylpyridine (20.00 g, 80.00 mmol) in acetonitrile (350 mL) was added sodium iodide (24.00 g, 160.0 mmol) and acetyl chloride (4.70 g, 59.9 mmol) at 0C under N2 in a 500 mL round bottom flask. The mixture was heated to 90C and stirred for 16 h. LC-MS showed the reaction was complete. The mixture was filtered, the precipitate was dissolved with DCM (50 mL) and water (50 mL), the organic layer was washed with water (30 mL x 2), dried over Na2SO4 and filtered. The filtrate was concentrated in vacuo to give the title compound, which was used directly for next step without further purification.1H NMR (CDCl3, 400 MHz): 8.39 (s, 1H), 7.60 (s, 1H), 2.33 (s, 3H). MS (ESI) m/z 297.8/299.8 (M+H).

The chemical industry reduces the impact on the environment during synthesis 3430-26-0, I believe this compound will play a more active role in future production and life.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SHEN, Dong-Ming; KUANG, Rongze; KUMAR, Puneet; DUFFY, Joseph, L.; ZHU, Cheng; ALI, Amjad; YANG, Meng; DEBENHAM, John, S.; (124 pag.)WO2018/39094; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 3430-26-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 3430-26-0, name is 2,5-Dibromo-4-methylpyridine, molecular formula is C6H5Br2N, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

5-bromo-4-methyl-pyridine-2-carbonitrile:To a solution of 2,5-dibromo-4-methylpyridine (15 g, 59.8 mmol, Eq: 1.00) in DMF (100 ml) was added copper(1) cyanide (4.28 g, 47.8 mmol, Eq: 0.8) and sodium cyanide (2.34 g, 47.8 mmol, Eq: 0.8). The reaction mixture was refluxed for 20 hr at which point a precipitate formed. Upon cooling water was added and the mixture sonicated. The solids were filtered and washed with water. The resulting filtrate was extracted with EtOAc and the organic layers then combined, washed with water and brine, and concentrated under reduced pressure. The crude material was then purified by column chromatography (0-10% EtOAc/Hex gradient) to give 5-bromo-4-methyl-pyridine-2-carbonitrile (5 g, 42.4% yield) as a white solid.

According to the analysis of related databases, 3430-26-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Hoffmann-La Roche Inc; Bhagirath, Niala; Brameld, Kenneth Albert; Kennedy-Smith, Joshua; US2013/90334; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 3430-26-0, name is 2,5-Dibromo-4-methylpyridine. A new synthetic method of this compound is introduced below., Recommanded Product: 3430-26-0

5-bromo-4-methyl-pyridine-2-carbonitrile: To a solution of 2,5-dibromo-4-methylpyridine (15 g, 59.8 mmol, Eq: 1.00) in DMF (100 ml) was added copper(I) cyanide (4.28 g, 47.8 mmol, Eq: 0.8) and sodium cyanide (2.34 g, 47.8 mmol, Eq: 0.8). The reaction mixture was refluxed for 20 hr at which point a precipitate formed. Upon cooling water was added and the mixture sonicated. The solids were filtered and washed with water. The resulting filtrate was extracted with EtOAc and the organic layers then combined, washed with water and brine, and concentrated under reduced pressure. The crude material was then purified by column chromatography (0-10% EtOAc/Hex gradient) to give 5-bromo-4-methyl-pyridine-2-carbonitrile (5 g, 42.4% yield) as a white solid.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3430-26-0, 2,5-Dibromo-4-methylpyridine.

Reference:
Patent; Hoffmann-La Roche Inc.; Bhagirath, Niala; Brameld, Kenneth Albert; Kennedy-Smith, Joshua; US2013/90333; (2013); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 3430-26-0, name is 2,5-Dibromo-4-methylpyridine. A new synthetic method of this compound is introduced below., Product Details of 3430-26-0

Intermediate 43. Step 1; 5-bromo-4-methylpicolinic acid To a solution of 2,5-dibromo-4-methylpyridine (3 g, 11.96 mmol) in anhydrous toluene (40 ml)) was added BuLi (5.74 ml, 14.35 mmol) at -78 °C dropwise. The reaction mixture was stirred at – 78 °C for 1 h. Then the reaction mixture was poured into a 100 mL beaker with dry carbon dioxide (4 g, 91 mmol). The reaction mixture was stirred at 20 °C for another 10 minutes. Then the mixture was poured into saturated citric acid and a yellow precipitate was formed. The suspension was filtered and the solid was collected, dried in vacuo to give 5-bromo-4- methylpicolinic acid. 1HNMR (400 MHz, DMSO-i): delta = 8.71 (s, 1 H), 7.99 (s, 1 H), 2.40 (s, 3 H). MS: 215.9 (M+l) ppm.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3430-26-0, 2,5-Dibromo-4-methylpyridine.

Reference:
Patent; MERCK SHARP & DOHME CORP.; LIU, Jian; KOZLOWSKI, Joseph, A.; ALHASSAN, Abdul-Basit; BOGA, Sobhana Babu; GAO, Xiaolei; GUIADEEN, Deodialsingh; WANG, Jyhshing; XU, Jiayi; YU, Wensheng; YU, Younong; CAI, Jiaqiang; LIU, Shilan; WANG, Dahai; WU, Hao; YANG, Chundao; (211 pag.)WO2016/109221; (2016); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3430-26-0, name is 2,5-Dibromo-4-methylpyridine, the common compound, a new synthetic route is introduced below. COA of Formula: C6H5Br2N

To a solution of 2,5-dibromo-4-methylpyridine (20.00 g, 80.00 mmol) in acetonitrile (350 mL) was added sodium iodide (24.00 g, 160.0 mmol) and acetyl chloride (4.70 g, 59.9 mmol) at 0C under N2 in a 500 mL round bottom flask. The mixture was heated to 90C and stirred for 16 h. LC-MS showed the reaction was complete. The mixture was filtered, the precipitate was dissolved with DCM (50 mL) and water (50 mL), the organic layer was washed with water (30 mL x 2), dried over Na2SO4 and filtered. The filtrate was concentrated in vacuo to give the title compound, which was used directly for next step without further purification.1H NMR (CDCl3, 400 MHz): 8.39 (s, 1H), 7.60 (s, 1H), 2.33 (s, 3H). MS (ESI) m/z 297.8/299.8 (M+H).

The synthetic route of 3430-26-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SHEN, Dong-Ming; KUANG, Rongze; KUMAR, Puneet; DUFFY, Joseph, L.; ZHU, Cheng; ALI, Amjad; YANG, Meng; DEBENHAM, John, S.; (124 pag.)WO2018/39094; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3430-26-0, name is 2,5-Dibromo-4-methylpyridine, the common compound, a new synthetic route is introduced below. COA of Formula: C6H5Br2N

To a solution of 2,5-dibromo-4-methylpyridine (20.00 g, 80.00 mmol) in acetonitrile (350 mL) was added sodium iodide (24.00 g, 160.0 mmol) and acetyl chloride (4.70 g, 59.9 mmol) at 0C under N2 in a 500 mL round bottom flask. The mixture was heated to 90C and stirred for 16 h. LC-MS showed the reaction was complete. The mixture was filtered, the precipitate was dissolved with DCM (50 mL) and water (50 mL), the organic layer was washed with water (30 mL x 2), dried over Na2SO4 and filtered. The filtrate was concentrated in vacuo to give the title compound, which was used directly for next step without further purification.1H NMR (CDCl3, 400 MHz): 8.39 (s, 1H), 7.60 (s, 1H), 2.33 (s, 3H). MS (ESI) m/z 297.8/299.8 (M+H).

The synthetic route of 3430-26-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; SHEN, Dong-Ming; KUANG, Rongze; KUMAR, Puneet; DUFFY, Joseph, L.; ZHU, Cheng; ALI, Amjad; YANG, Meng; DEBENHAM, John, S.; (124 pag.)WO2018/39094; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 3430-26-0, Adding some certain compound to certain chemical reactions, such as: 3430-26-0, name is 2,5-Dibromo-4-methylpyridine,molecular formula is C6H5Br2N, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3430-26-0.

Step A: 5-Bromo-2-iodo-4-methyl-pyridine To a solution of 2,5-dibromo-4-methylpyridine (2 g) in acetonitrile (40 ml) at room temperature under argon were added sodium iodide (4.8 g) then acetyl chloride (0.94 g). After 3 hours stirring at room temperature the white solid formed was filtered off and the filtrate was neutralized with aqueous saturated solution of sodium hydrogenocarbonate. The organic phase was dried over sodium sulfate and concentrated in vacuo. The residue was purified by column chromatography (ethyl acetate/cyclohexane) to afford the title product as a brown solid (2.04 g). 1H-NMR (CDCl3, 400 MHz): 8.40 (s, 1H), 7.60 (s, 1H), 2.30 (s, 3H),

According to the analysis of related databases, 3430-26-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SYNGENTA CROP PROTECTION LLC; US2012/238517; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 3430-26-0, Adding some certain compound to certain chemical reactions, such as: 3430-26-0, name is 2,5-Dibromo-4-methylpyridine,molecular formula is C6H5Br2N, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3430-26-0.

Step A: 5-Bromo-2-iodo-4-methyl-pyridine To a solution of 2,5-dibromo-4-methylpyridine (2 g) in acetonitrile (40 ml) at room temperature under argon were added sodium iodide (4.8 g) then acetyl chloride (0.94 g). After 3 hours stirring at room temperature the white solid formed was filtered off and the filtrate was neutralized with aqueous saturated solution of sodium hydrogenocarbonate. The organic phase was dried over sodium sulfate and concentrated in vacuo. The residue was purified by column chromatography (ethyl acetate/cyclohexane) to afford the title product as a brown solid (2.04 g). 1H-NMR (CDCl3, 400 MHz): 8.40 (s, 1H), 7.60 (s, 1H), 2.30 (s, 3H),

According to the analysis of related databases, 3430-26-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SYNGENTA CROP PROTECTION LLC; US2012/238517; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 3430-26-0, Adding some certain compound to certain chemical reactions, such as: 3430-26-0, name is 2,5-Dibromo-4-methylpyridine,molecular formula is C6H5Br2N, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3430-26-0.

Step A: 5-Bromo-2-iodo-4-methyl-pyridine To a solution of 2,5-dibromo-4-methylpyridine (2 g) in acetonitrile (40 ml) at room temperature under argon were added sodium iodide (4.8 g) then acetyl chloride (0.94 g). After 3 hours stirring at room temperature the white solid formed was filtered off and the filtrate was neutralized with aqueous saturated solution of sodium hydrogenocarbonate. The organic phase was dried over sodium sulfate and concentrated in vacuo. The residue was purified by column chromatography (ethyl acetate/cyclohexane) to afford the title product as a brown solid (2.04 g). 1H-NMR (CDCl3, 400 MHz): 8.40 (s, 1H), 7.60 (s, 1H), 2.30 (s, 3H),

According to the analysis of related databases, 3430-26-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SYNGENTA CROP PROTECTION LLC; US2012/238517; (2012); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem