Category: 83766-88-5

Adding a certain compound to certain chemical reactions, such as: 83766-88-5, 2-(tert-Butoxy)pyridine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Quality Control of 2-(tert-Butoxy)pyridine, blongs to pyridine-derivatives compound. Quality Control of 2-(tert-Butoxy)pyridine

Carboxylic acid (0.2 g, 1.64 mmol), tert-butoxypyridine (0.33 g, 2.21 mmol) and boron trifluoride diethyl etherate (0.31 g, 2.21 mmol) in dry PhCH3 (2 mL) were added to a 20-ml vial. The reaction mixture was then allowed to stir at room temperature for 30 min before quenching with anhydrous NaHCO3. The reaction mixture was diluted with ethyl acetate (30 mL), then washed with water (20 mL), followed by brine (20 mL). The organic layer was dried over anhydrous sodium sulfate and carefully concentrated under reduced pressure. The resulting residue was then purified by flash column chromatography on silica gel with 0:4 to 1:4 dichloromethane/hexane as eluent to yield the desired product 5a as a colorless oil.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,83766-88-5, 2-(tert-Butoxy)pyridine, and friends who are interested can also refer to it.

Reference:
Article; La, Minh Thanh; Kim, Hee-Kwon; Tetrahedron; vol. 74; 27; (2018); p. 3748 – 3754;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 83766-88-5, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.83766-88-5, name is 2-(tert-Butoxy)pyridine, molecular formula is C9H13NO, molecular weight is 151.21, as common compound, the synthetic route is as follows.

Carboxylic acid (0.2 g, 1.64 mmol), tert-butoxypyridine (0.33 g, 2.21 mmol) and boron trifluoride diethyl etherate (0.31 g, 2.21 mmol) in dry PhCH3 (2 mL) were added to a 20-ml vial. The reaction mixture was then allowed to stir at room temperature for 30 min before quenching with anhydrous NaHCO3. The reaction mixture was diluted with ethyl acetate (30 mL), then washed with water (20 mL), followed by brine (20 mL). The organic layer was dried over anhydrous sodium sulfate and carefully concentrated under reduced pressure. The resulting residue was then purified by flash column chromatography on silica gel with 0:4 to 1:4 dichloromethane/hexane as eluent to yield the desired product 5a as a colorless oil.

Statistics shows that 83766-88-5 is playing an increasingly important role. we look forward to future research findings about 2-(tert-Butoxy)pyridine.

Reference:
Article; La, Minh Thanh; Kim, Hee-Kwon; Tetrahedron; vol. 74; 27; (2018); p. 3748 – 3754;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 83766-88-5, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 83766-88-5 as follows.

A 5-mL reactionvial was equipped with a stir bar, a rubber septum, and an argon inlet needle.The vial was charged with t-butoxypyridine(3) (1.2 mmol) and dry PhCH3(1 mL), and was allowed to stir at 0 C. MeOTf (1.2 mmol) was added dropwise tothe reaction mixture over 5 min. Upon complete addition, the reaction wasallowed to stir for 1h. The alcohol (1 mmol) dissolved in dry PhCH3or dry DCM (1 mL) depending upon the solubility of the alcohol, was added over30 seconds to the reaction mixture. The ice bath was removed and the reactionmixture was allowed to stir at room temperature (~ 23 C) for 1.5h. When thereaction was complete by TLC, the mixture was diluted in Et2O or DCMdepending upon the solubility of the product. Et2O was preferredbecause the hydroxypyridine/pyridone byproduct (5) was less soluble in this solvent than DCM. The diluted reactionmixture was washed with water (10 mL), then brine (10 mL). The organic fractionwas dried over anhydrous sodium sulfate, filtered, and concentrated in vacuo to isolate the crude productmixture. The crude mixture was purified by flash chromatography to yield thepure t-butyl ether.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,83766-88-5, its application will become more common.

Reference:
Article; Salvati, Anna E.; Hubley, Christian T.; Albiniak, Philip A.; Tetrahedron Letters; vol. 55; 51; (2014); p. 7133 – 7135;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 83766-88-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 83766-88-5, name is 2-(tert-Butoxy)pyridine, molecular formula is C9H13NO, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Carboxylic acid (0.2 g, 1.64 mmol), tert-butoxypyridine (0.33 g, 2.21 mmol) and boron trifluoride diethyl etherate (0.31 g, 2.21 mmol) in dry PhCH3 (2 mL) were added to a 20-ml vial. The reaction mixture was then allowed to stir at room temperature for 30 min before quenching with anhydrous NaHCO3. The reaction mixture was diluted with ethyl acetate (30 mL), then washed with water (20 mL), followed by brine (20 mL). The organic layer was dried over anhydrous sodium sulfate and carefully concentrated under reduced pressure. The resulting residue was then purified by flash column chromatography on silica gel with 0:4 to 1:4 dichloromethane/hexane as eluent to yield the desired product 5a as a colorless oil.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 83766-88-5, 2-(tert-Butoxy)pyridine.

Reference:
Article; La, Minh Thanh; Kim, Hee-Kwon; Tetrahedron; vol. 74; 27; (2018); p. 3748 – 3754;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 83766-88-5, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.83766-88-5, name is 2-(tert-Butoxy)pyridine, molecular formula is C9H13NO, molecular weight is 151.21, as common compound, the synthetic route is as follows.

Carboxylic acid (0.2 g, 1.64 mmol), tert-butoxypyridine (0.33 g, 2.21 mmol) and boron trifluoride diethyl etherate (0.31 g, 2.21 mmol) in dry PhCH3 (2 mL) were added to a 20-ml vial. The reaction mixture was then allowed to stir at room temperature for 30 min before quenching with anhydrous NaHCO3. The reaction mixture was diluted with ethyl acetate (30 mL), then washed with water (20 mL), followed by brine (20 mL). The organic layer was dried over anhydrous sodium sulfate and carefully concentrated under reduced pressure. The resulting residue was then purified by flash column chromatography on silica gel with 0:4 to 1:4 dichloromethane/hexane as eluent to yield the desired product 5a as a colorless oil.

Statistics shows that 83766-88-5 is playing an increasingly important role. we look forward to future research findings about 2-(tert-Butoxy)pyridine.

Reference:
Article; La, Minh Thanh; Kim, Hee-Kwon; Tetrahedron; vol. 74; 27; (2018); p. 3748 – 3754;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 83766-88-5, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 83766-88-5 as follows.

A 5-mL reactionvial was equipped with a stir bar, a rubber septum, and an argon inlet needle.The vial was charged with t-butoxypyridine(3) (1.2 mmol) and dry PhCH3(1 mL), and was allowed to stir at 0 C. MeOTf (1.2 mmol) was added dropwise tothe reaction mixture over 5 min. Upon complete addition, the reaction wasallowed to stir for 1h. The alcohol (1 mmol) dissolved in dry PhCH3or dry DCM (1 mL) depending upon the solubility of the alcohol, was added over30 seconds to the reaction mixture. The ice bath was removed and the reactionmixture was allowed to stir at room temperature (~ 23 C) for 1.5h. When thereaction was complete by TLC, the mixture was diluted in Et2O or DCMdepending upon the solubility of the product. Et2O was preferredbecause the hydroxypyridine/pyridone byproduct (5) was less soluble in this solvent than DCM. The diluted reactionmixture was washed with water (10 mL), then brine (10 mL). The organic fractionwas dried over anhydrous sodium sulfate, filtered, and concentrated in vacuo to isolate the crude productmixture. The crude mixture was purified by flash chromatography to yield thepure t-butyl ether.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,83766-88-5, its application will become more common.

Reference:
Article; Salvati, Anna E.; Hubley, Christian T.; Albiniak, Philip A.; Tetrahedron Letters; vol. 55; 51; (2014); p. 7133 – 7135;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Related Products of 83766-88-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 83766-88-5, name is 2-(tert-Butoxy)pyridine, molecular formula is C9H13NO, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Carboxylic acid (0.2 g, 1.64 mmol), tert-butoxypyridine (0.33 g, 2.21 mmol) and boron trifluoride diethyl etherate (0.31 g, 2.21 mmol) in dry PhCH3 (2 mL) were added to a 20-ml vial. The reaction mixture was then allowed to stir at room temperature for 30 min before quenching with anhydrous NaHCO3. The reaction mixture was diluted with ethyl acetate (30 mL), then washed with water (20 mL), followed by brine (20 mL). The organic layer was dried over anhydrous sodium sulfate and carefully concentrated under reduced pressure. The resulting residue was then purified by flash column chromatography on silica gel with 0:4 to 1:4 dichloromethane/hexane as eluent to yield the desired product 5a as a colorless oil.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 83766-88-5, 2-(tert-Butoxy)pyridine.

Reference:
Article; La, Minh Thanh; Kim, Hee-Kwon; Tetrahedron; vol. 74; 27; (2018); p. 3748 – 3754;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 83766-88-5, 2-(tert-Butoxy)pyridine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 83766-88-5, blongs to pyridine-derivatives compound. category: pyridine-derivatives

Carboxylic acid (0.2 g, 1.64 mmol), tert-butoxypyridine (0.33 g, 2.21 mmol) and boron trifluoride diethyl etherate (0.31 g, 2.21 mmol) in dry PhCH3 (2 mL) were added to a 20-ml vial. The reaction mixture was then allowed to stir at room temperature for 30 min before quenching with anhydrous NaHCO3. The reaction mixture was diluted with ethyl acetate (30 mL), then washed with water (20 mL), followed by brine (20 mL). The organic layer was dried over anhydrous sodium sulfate and carefully concentrated under reduced pressure. The resulting residue was then purified by flash column chromatography on silica gel with 0:4 to 1:4 dichloromethane/hexane as eluent to yield the desired product 5a as a colorless oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,83766-88-5, its application will become more common.

Reference:
Article; La, Minh Thanh; Kim, Hee-Kwon; Tetrahedron; vol. 74; 27; (2018); p. 3748 – 3754;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 83766-88-5, 2-(tert-Butoxy)pyridine, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Product Details of 83766-88-5, blongs to pyridine-derivatives compound. Product Details of 83766-88-5

Carboxylic acid (0.2 g, 1.64 mmol), tert-butoxypyridine (0.33 g, 2.21 mmol) and boron trifluoride diethyl etherate (0.31 g, 2.21 mmol) in dry PhCH3 (2 mL) were added to a 20-ml vial. The reaction mixture was then allowed to stir at room temperature for 30 min before quenching with anhydrous NaHCO3. The reaction mixture was diluted with ethyl acetate (30 mL), then washed with water (20 mL), followed by brine (20 mL). The organic layer was dried over anhydrous sodium sulfate and carefully concentrated under reduced pressure. The resulting residue was then purified by flash column chromatography on silica gel with 0:4 to 1:4 dichloromethane/hexane as eluent to yield the desired product 5a as a colorless oil.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,83766-88-5, 2-(tert-Butoxy)pyridine, and friends who are interested can also refer to it.

Reference:
Article; La, Minh Thanh; Kim, Hee-Kwon; Tetrahedron; vol. 74; 27; (2018); p. 3748 – 3754;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 83766-88-5, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.83766-88-5, name is 2-(tert-Butoxy)pyridine, molecular formula is C9H13NO, molecular weight is 151.21, as common compound, the synthetic route is as follows.

Carboxylic acid (0.2 g, 1.64 mmol), tert-butoxypyridine (0.33 g, 2.21 mmol) and boron trifluoride diethyl etherate (0.31 g, 2.21 mmol) in dry PhCH3 (2 mL) were added to a 20-ml vial. The reaction mixture was then allowed to stir at room temperature for 30 min before quenching with anhydrous NaHCO3. The reaction mixture was diluted with ethyl acetate (30 mL), then washed with water (20 mL), followed by brine (20 mL). The organic layer was dried over anhydrous sodium sulfate and carefully concentrated under reduced pressure. The resulting residue was then purified by flash column chromatography on silica gel with 0:4 to 1:4 dichloromethane/hexane as eluent to yield the desired product 5a as a colorless oil.

Statistics shows that 83766-88-5 is playing an increasingly important role. we look forward to future research findings about 2-(tert-Butoxy)pyridine.

Reference:
Article; La, Minh Thanh; Kim, Hee-Kwon; Tetrahedron; vol. 74; 27; (2018); p. 3748 – 3754;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem