Category: 851386-40-8

Synthetic Route of 851386-40-8, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.851386-40-8, name is 4-Chloro-2,5-difluoropyridine, molecular formula is C5H2ClF2N, molecular weight is 149.53, as common compound, the synthetic route is as follows.

To a microwave vial containing solution of 4-chloro-2,5-difluoropyridine (0.40 g, 2.7 mmol) in dioxane (7 mL), were added Intermediate 14C (1100 mg, 3.2 mmol), K3PO4 (1.30 g, 6.2 mmol), water (1.4 mL) and PdCl2(dppf)CH2Cl2 adduct (0.17 g, 0.21 mmol) at rt. The mixture was purged with nitrogen, and then was heated in a microwave reactor at 120 C for 6 min. The reaction mixture was cooled to rt. The aqueous layer was removed with a pipette. The organic phase was concentrated and was purified by normal phase chromatography to afford Intermediate 14D (350 mg, 47%) as a tan solid. LC-MS (ESI) m/z: 278.0 [M+H]+.

The chemical industry reduces the impact on the environment during synthesis 851386-40-8, I believe this compound will play a more active role in future production and life.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; QUAN, Mimi L.; HU, Zilun; WANG, Cailan; PATIL, Sharanabasappa; WO2015/2915; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 851386-40-8, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.851386-40-8, name is 4-Chloro-2,5-difluoropyridine, molecular formula is C5H2ClF2N, molecular weight is 149.53, as common compound, the synthetic route is as follows.

To a microwave vial containing solution of 4-chloro-2,5-difluoropyridine (0.40 g, 2.7 mmol) in dioxane (7 mL), were added Intermediate 14C (1100 mg, 3.2 mmol), K3PO4 (1.30 g, 6.2 mmol), water (1.4 mL) and PdCl2(dppf)CH2Cl2 adduct (0.17 g, 0.21 mmol) at rt. The mixture was purged with nitrogen, and then was heated in a microwave reactor at 120 C for 6 min. The reaction mixture was cooled to rt. The aqueous layer was removed with a pipette. The organic phase was concentrated and was purified by normal phase chromatography to afford Intermediate 14D (350 mg, 47%) as a tan solid. LC-MS (ESI) m/z: 278.0 [M+H]+.

The chemical industry reduces the impact on the environment during synthesis 851386-40-8, I believe this compound will play a more active role in future production and life.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; QUAN, Mimi L.; HU, Zilun; WANG, Cailan; PATIL, Sharanabasappa; WO2015/2915; (2015); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 851386-40-8, Adding some certain compound to certain chemical reactions, such as: 851386-40-8, name is 4-Chloro-2,5-difluoropyridine,molecular formula is C5H2ClF2N, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 851386-40-8.

[(00592] Step 1 : Preparation of (4-chloro-2,5-difluoropyridin-3-yl)(5-cyclopropylisoxazol-3-yl)methanone . A cold (-78 C) solution of 4-chloro-2,5-difluoropyridine (246 mg, 1.65 mmol) in THF (15.0 mL) was treated with 2.5 M n-BuLi in hexanes (718 pL, 1.79 mmol). After stirring for 2 h at -78 C, the reaction mixture was treated with a solution of methyl 5- cyclopropylisoxazole-3-carboxylate (250 mg, 1.50 mmol) in THF (2 mL). The resulting mixture was stirred overnight at ambient temperature before quenching with saturated NH4Q(aq). Subsequently, the mixture was diluted with water, and extracted with EtOAc. The organic extracts were washed with brine, dried over anhydrous Na2S04(S>, filtered, and concentrated in vacuo. The crude residue was purified by silica chromatography (10-90% EtOAc in hexanes) to afford the title compound (201 mg, 47%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 851386-40-8, 4-Chloro-2,5-difluoropyridine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ARRAY BIOPHARMA INC.; WALLS, Shane M.; REN, Li; RAMANN, Ginelle A.; MORENO, David A.; METCALF, Andrew T.; MCFADDIN, Elizabeth A.; KOLAKOWSKI, Gabrielle R.; BLAKE, James F.; DAI, Donghua; HAAS, Julia; JIANG, Yutong; KAHN, Dean; (368 pag.)WO2019/143994; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Application of 851386-40-8, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.851386-40-8, name is 4-Chloro-2,5-difluoropyridine, molecular formula is C5H2ClF2N, molecular weight is 149.53, as common compound, the synthetic route is as follows.

To a dry microwave vial under nitrogen was added (S)-isopropyl 2-(fert- butoxy)-2-(4-(4,4-dimethylpiperidin-l-yl)-2,6-dimemyl-5-(l,2,3,4-tetrahydroisoquinolin- 6-yl)pyridin-3-yl)acetate (46.8 mg, 0.090 mmol), 4-chloro-2,5-difluoropyridine (149.5 mg, 1.0 mmol), and acetonitrile (0.9 mL). The reaction was flushed briefly with nitrogen, treated with Hunig ‘s base (230 mu, 1.37 mmol), capped and heated in a microwave reactor at 85 – 95 C for 17h, followed by heating at 80 C for 36h in a sand bath. The crude reaction was purified via reverse phase Prep-HPLC to afford isopropyl (S)-2-(fert- butoxy)-2-(5-(2-(2,5-difluoropyridin-4-yl)-l,2,3,4-tetrahydroisoquinolin-6-yl)-4-(4,4- dimethylpiperidin-l-yl)-2,6-dimethylpyridin-3-yl)acetate, 42 mg (quant). LCMS (M+l) = 635.4.

The chemical industry reduces the impact on the environment during synthesis 851386-40-8, I believe this compound will play a more active role in future production and life.

Reference:
Patent; VIIV HEALTHCARE UK (NO.5) LIMITED; BOWSHER, Michael S.; DESKUS, Jeffrey; EASTMAN, Kyle J.; GILLIS, Eric P; FRENNESSON, David B; IWUAGWU, Christiana; NAIDU, B. Narasimhulu; PARCELLA, Kyle E.; PEESE, Kevin M; SAULNIER, Mark G; SIVAPRAKASAM, Prasanna; (220 pag.)WO2018/127801; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 851386-40-8, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 851386-40-8 as follows.

Under inert gas atmosphere 0.80 g (2.53 mmol) of example XIII.1 , 0.65 g (2.53 mmol) of 2-chloro-4-iodo-3-methyl-pyridine, 1.00 g (10.4 mmol) NaOtBu and 100 mg (0.14 mmol) chloro(2-dicyclohexylphosphino-2’>4′,6′-triisopropyl-1 , 1 ‘-biphenyl)(2-(2- aminoethyl)-phenyl)-palladium (II) are added to 50 mL dioxane and stirred at 45 C over night. Afterwards the solvent is removed, water is added and the product is extracted with EtOAc. The organic layer is dried over MgS04, filtered and the solvent is removed in vacuo. The crude product is purified by HPLC (ACN/H20/TFA). C20H24CIN3O2 (M= 373.9 g/mol) ESI-MS: 374 [M+H]+ Rt (HPLC):0.77 min (method M); The following compounds are prepared analogously to example XXI.1 : For example XXI.3 and XXI.10 the reaction temperature is 70-80 C for 3-4 h. For example XXI.5 the reaction time is 3 h. For example XXI.6 the reaction conditions are 80 C over night,

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,851386-40-8, its application will become more common.

Reference:
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; FLECK, Martin; HEINE, Niklas; NOSSE, Bernd; ROTH, Gerald Juergen; WO2014/114578; (2014); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 851386-40-8, Adding some certain compound to certain chemical reactions, such as: 851386-40-8, name is 4-Chloro-2,5-difluoropyridine,molecular formula is C5H2ClF2N, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 851386-40-8.

4-chloro-2,5-difluoropyridine E2 (1 .00 equivalents), 4-cyano-phenylboronic acid (1 .20 equivalents), Pd2(dba)3 (0.02 equivalent), 2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl (SPhos) (0.08 equivalents) and tribasic potassium phosphate (2.50 equivalents) are stirred under nitrogen atmosphere in a dioxane/water mixture (ratio of 10:1 ) at 1 10 C for 20 h. To the reaction mixture Celite and active carbon are added and stirred at 1 10C for 15 min. Subsequently the reaction mixture is hot filtered and the residue washed with dioxane. The reaction mixture is poured into 200 mL of a saturated sodium chloride solution and extracted with ethyl acetate. The combined organic phases are washed with saturated sodium chloride solution, dried over MgSC>4 and the solvent is evaporated under reduced pressure. The crude product obtained is purified by recrystallization in cyclohexane and the product obtained as solid. (0422) Instead of a boronic acid a corresponding boronic acid ester may be used.The synthesis of Z3 is carried out according to AAV1-1, wherein 4-chloro-2,5-difluoropyridine E2 reacts with 3-cyano-phenylboronic acid ester. eneral procedure for synthesis AAV2-1:

According to the analysis of related databases, 851386-40-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CYNORA GMBH; ESTEBAN, Alhama Arjona; (133 pag.)WO2018/189356; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 851386-40-8, Adding some certain compound to certain chemical reactions, such as: 851386-40-8, name is 4-Chloro-2,5-difluoropyridine,molecular formula is C5H2ClF2N, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 851386-40-8.

4-chloro-2,5-difluoropyridine E2 (1 .00 equivalents), 4-cyano-phenylboronic acid (1 .20 equivalents), Pd2(dba)3 (0.02 equivalent), 2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl (SPhos) (0.08 equivalents) and tribasic potassium phosphate (2.50 equivalents) are stirred under nitrogen atmosphere in a dioxane/water mixture (ratio of 10:1 ) at 1 10 C for 20 h. To the reaction mixture Celite and active carbon are added and stirred at 1 10C for 15 min. Subsequently the reaction mixture is hot filtered and the residue washed with dioxane. The reaction mixture is poured into 200 mL of a saturated sodium chloride solution and extracted with ethyl acetate. The combined organic phases are washed with saturated sodium chloride solution, dried over MgSC>4 and the solvent is evaporated under reduced pressure. The crude product obtained is purified by recrystallization in cyclohexane and the product obtained as solid. (0422) Instead of a boronic acid a corresponding boronic acid ester may be used.The synthesis of Z3 is carried out according to AAV1-1, wherein 4-chloro-2,5-difluoropyridine E2 reacts with 3-cyano-phenylboronic acid ester. eneral procedure for synthesis AAV2-1:

According to the analysis of related databases, 851386-40-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; CYNORA GMBH; ESTEBAN, Alhama Arjona; (133 pag.)WO2018/189356; (2018); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.851386-40-8, name is 4-Chloro-2,5-difluoropyridine, molecular formula is C5H2ClF2N, molecular weight is 149.53, as common compound, the synthetic route is as follows.Safety of 4-Chloro-2,5-difluoropyridine

To a solution of 4-chloro-2,5-difluoropyridine (200 nig, 1.33 mmol) and 4M HCl in dioxane (0.33 ml, 1.33 mmol) in 2-propanol (3 ml) was added hydrazine hydrate (134 mg, 2.68 mmol). Reaction mixture was stirred at rt for 1 month. Solvents were evaporated under vacuum. Aqueous NaHC03 solution was added to the mixture. Precipitate formed was filtered oft” washed with water and dried under vacuum yielding 51 mg of 4-chloro-5- fluoro-2-hydrazinylpyridine and 2,5-difluoro-4-hydrazinylpyridine as a 1/1 mixture.MS: m/z 162 I M I f ] . 1H NMR (DMSO-d6) delta: 8. 19 (br s, IH), 8.09 (d, 1 1 1 ).. 7.70 (d, 1 1 1 }.. 7.66 (d, H), 6.88 (d, IH), 6.55 (d, IH), 4.39 (d, 2H), 4.21 (br s, 2H ) To a solution containing the mixture of 4-chloro-5-fluoro-2-hydrazinylpyridine and 2,5-difluoro-4-hydrazinylpyridine (50 mg, 0.31 mmol) in THF (3 ml) at 0C was added triphosgene (92 mg, 0.31 mmol). Reaction mixture was stirred at 0C for 1 hour. Solvents were evaporated under vacuum. A solution of IM aqueous HCl was then added and the mixture was extracted 3 times with EtOAc. Organic layers were concentrated under vacuum. Evaporation residue was dissolved in IM NaOH solution and extracted twice with EtOAc. Aqueous phase was acidified with cone, HCl and extracted twice with EtOAc. Organic layers were dried and concentrated under vacuum. Evaporation residue was stirred in Et20, filtered off and dried under vacuum yielding 1 1 mg of pure 7-chloro-6-fluoro- [l,2,4]triazolo[4,3-a]pyridii -3(2H)-one. MS: m/z 188 [M+Hf. 1H NMR ( DM SO-d,.) delta: 12.71 (br s, IH), 8.27 (dd, IH), 7.75 (dd, IH)

At the same time, in my other blogs, there are other synthetic methods of this type of compound,851386-40-8, 4-Chloro-2,5-difluoropyridine, and friends who are interested can also refer to it.

Reference:
Patent; RICHTER GEDEON NYRT.; ORION CORPORATION; HAIKARAINEN, Anssi; JOUBERT, Muriel; KAROLYI, Benedek; KAeSNAeNEN, Heikki; PASSINIEMI, Mikko; POHJAKALLIO, Antti; SZANTO, Gabor; VAISMAA, Matti; (97 pag.)WO2019/43635; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 851386-40-8, name is 4-Chloro-2,5-difluoropyridine. This compound has unique chemical properties. The synthetic route is as follows. Safety of 4-Chloro-2,5-difluoropyridine

Diisopropylamine (30 g, 0.29 mol) was dissolved in anhydrous tetrahydrofuran (200 ml) and the nitrogen was removed.Cooling to -65 – 40 ,A solution of n-butyllithium / n-hexane (2.5 M, 105 ml)Stir the mixture for 30 minutes.4-chloro-2,5-difluoropyridine (50 g, 0.33 mol) obtained in the above step was slowly added dropwise at -65 C,After the dropwise addition, the mixture was stirred for 1 hour.A solution of methyl iodide (42 g, 0.29 mol)Dripping finished slowly rose to -50 ,And stirred for 1 hour,TLC reaction is complete.The reaction was quenched with saturated ammonium chloride solution,Methyl tert-butyl ether extraction reaction solution,The organic phase was washed with 2N hydrochloric acid,Then washed with water,Saturated sodium bicarbonate wash,Saturated with salt water,The organic phase was separated and dried over anhydrous sodium sulfate,filter,The filtrate was distilled off at 80 C to 120 C under atmospheric pressure,The remaining crude product at 0.09MPa at 70 ~ ~ 100 vacuum distillation of the product,A fraction of 65-80 C was collected to give the product 4-chloro-2,5-difluoro-3-methylpyridine (34.8 g, yield 64%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 851386-40-8, 4-Chloro-2,5-difluoropyridine.

Reference:
Patent; Danuo Pharmaceutical (Suzhou) Co., Ltd.; Ding, Jun; He, Shijie; Zhuang, Zhijun; Ma, Zhenkun; (13 pag.)CN106432222; (2017); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 851386-40-8, name is 4-Chloro-2,5-difluoropyridine. This compound has unique chemical properties. The synthetic route is as follows. name: 4-Chloro-2,5-difluoropyridine

To a solution of 4-chloro-2,5-difluoropyridine (200 nig, 1.33 mmol) and 4M HCl in dioxane (0.33 ml, 1.33 mmol) in 2-propanol (3 ml) was added hydrazine hydrate (134 mg, 2.68 mmol). Reaction mixture was stirred at rt for 1 month. Solvents were evaporated under vacuum. Aqueous NaHC03 solution was added to the mixture. Precipitate formed was filtered oft” washed with water and dried under vacuum yielding 51 mg of 4-chloro-5- fluoro-2-hydrazinylpyridine and 2,5-difluoro-4-hydrazinylpyridine as a 1/1 mixture.MS: m/z 162 I M I f ] . 1H NMR (DMSO-d6) delta: 8. 19 (br s, IH), 8.09 (d, 1 1 1 ).. 7.70 (d, 1 1 1 }.. 7.66 (d, H), 6.88 (d, IH), 6.55 (d, IH), 4.39 (d, 2H), 4.21 (br s, 2H )

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 851386-40-8, 4-Chloro-2,5-difluoropyridine.

Reference:
Patent; RICHTER GEDEON NYRT.; ORION CORPORATION; HAIKARAINEN, Anssi; JOUBERT, Muriel; KAROLYI, Benedek; KAeSNAeNEN, Heikki; PASSINIEMI, Mikko; POHJAKALLIO, Antti; SZANTO, Gabor; VAISMAA, Matti; (97 pag.)WO2019/43635; (2019); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem