New downstream synthetic route of 1-(4-Fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 888721-65-1, 1-(4-Fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Related Products of 888721-65-1 ,Some common heterocyclic compound, 888721-65-1, molecular formula is C13H10FNO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

EXAMPLE 48 N-(4-(6-Amino-1-methyl-1H-indazol-5-yloxy)-3-fluorophenyl)-1-(4-fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxamide methanesulfonate To a 10 mL screw-cap vial is added 5-(4-amino-2-fluorophenoxy)-N-benzhydryl-1-methyl-1H-indazol-6-amine (91 mg, 208 mumol), 1-(4-fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid (66.7 mg, 269.78 mumol), EDCI (90.9 mg, 466.9 mumol) and HOBt (47.7 mg, 311.3 mumol) followed by DMF (2 mL, 25.9 mmol). To the mixture is added DIPEA (90.5 muL, 518.8 mumol) and the mixture is stirred at RT for 12 hours. Additional EDCI (50 mg), HOBt (25 mg), DIPEA (0.02 mL), and 1-(4-fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid (40 mg) are added and the mixture is stirred for an additional 24 hours. The reaction is diluted into EtOAc (100 mL) and washed with saturated aqueous sodium chloride (3*25 mL). The combined aqueous solution is extracted with EtOAc (1*25 mL). The combined organic (100 mL) and washed with saturated aqueous sodium chloride (3*25 mL). The combined aqueous solution is extracted with EtOAc (1*25 mL). The combined organic solution is dried over Na2SO4, filtered, and concentrated to dryness. The residue is purified on a silica gel column eluding with DCM (A) and a 10% MeOH in DCM solution (B), gradient from 100% (A) to 90%(A): 10%(B) over 60 min to give a clear wax material as the desired product (114 mg, 82% yield). MS (m/z) 667.8 (M+H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 888721-65-1, 1-(4-Fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; LI, Tiechao; POBANZ, Mark Andrew; SHIH, Chuan; WU, Zhipei; YANG, Wei Jennifer; ZHONG, Boyu; US2010/22529; (2010); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Introduction of a new synthetic route about 888721-65-1

At the same time, in my other blogs, there are other synthetic methods of this type of compound,888721-65-1, 1-(4-Fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid, and friends who are interested can also refer to it.

Synthetic Route of 888721-65-1, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 888721-65-1, name is 1-(4-Fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid. A new synthetic method of this compound is introduced below.

To a solution of 1- (4-fluorophenyl) -6-methyl-2-oxo-l, 2- dihydropyridine-3-carboxylic acid (56.7 mg, 0.229 mmol) and N- [ 6- (4-amino-2-fluorophenoxy) -3-methylimidazo [1, 2-a] pyridin-2- yl] cyclopropanecarboxamide (60 mg, 0.176 mmol) in N, N- dimethylformamide (1 mL) were added N, N-diisopropylethylamine (61 muL, 0.352 mmol) and HATU (87 mg, 0.229 mmol), and the mixture was stirred at room temperature for 17 hr. Ethyl acetate and saturated aqueous sodium hydrogen carbonate solution were added to the reaction mixture, and the mixture was extracted 3 times with ethyl acetate. The organic layer was washed with saturated brine, dried over anhydrous magnesium sulfate and filtered, and the solvent was evaporated under reduced pressure. The obtained residue was purified by silica gel column chromatography (ethyl acetate alone) to give a yellow oil. The obtained oil was dissolved in ethyl acetate (1 mL) and left standing at room temperature for 17 hr. The precipitated solid was collected by filtration, washed with diethyl ether and collected by filtration to give the title compound (76 mg, 75%) as a white solid.1H-NMR (DMSOd6, 300 MHz) delta 0.78 (4H, m) , 1.74 – 1.91 (IH, m) , 2.07 (3H, s), 2.26 (3H, s) , 6.61 – 6.79 (IH, m) , 7.01 – 7.15 (2H, m) , 7.28 – 7.37 (IH, m) , 7.38 – 7.54 (5H, m) , 7.97 (IH, dd, J = 13.2, 2.5 Hz), 8.19 (IH, d, J = 1.9 Hz), 8.48 (1 H, d, J = 7.6 Hz), 10.21 (IH, br s) , 11.97 (IH, s) .

At the same time, in my other blogs, there are other synthetic methods of this type of compound,888721-65-1, 1-(4-Fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid, and friends who are interested can also refer to it.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; WO2009/136663; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

A new synthetic route of 1-(4-Fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid

With the rapid development of chemical substances, we look forward to future research findings about 888721-65-1.

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 888721-65-1, name is 1-(4-Fluorophenyl)-6-methyl-2-oxo-1,2-dihydropyridine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. SDS of cas: 888721-65-1

To a solution of N- [6- (4-amino-3- fluorophenoxy) imidazo [1, 2-a] pyridin-2- yl] cyclopropanecarboxamide (150 mg, 0.46 mmol) in N, N- dimethylacetamide (3.0 mL) were added 1- (4-fluorophenyl) -6- methyl-2-oxo-l, 2-dihydropyridine-3-carboxylic acid (170 mg, 0.689 mmol), HATU (262 mg, 0.689 mmol) and N,N- diisopropylethylamine (120 muL, 0.689 mmol), and the mixture was stirred at room temperature for 20 hr. Saturated aqueous sodium hydrogen carbonate was added to the reaction mixture, and the mixture was extracted with ethyl acetate/tetrahydrofuran. The organic layer was washed with saturated brine, dried over anhydrous magnesium sulfate and filtered. The solvent was evaporated under reduced pressure, and the residue was washed with ethyl acetate and collected by filtration to give the title compound (208 mg, 81%) as a white solid. 1H-NMR (DMSO-d6, 300MHz) delta 0.77 – 0.81 (4H, m) , 1.86 – 1.96 (IH, m) , 2.07 (3H, s) , 6.70 (IH, d, J = 8.1 Hz), 6.86 – 6.92 (IH, m) , 7.06 – 7.12 (2H, m) , 7.40 – 7.52 (5H, m) , 8.04 (IH, s), 8.37 – 8.56 (3H, m) , 10.97 (IH, s) , 12.04 (IH, s) .

With the rapid development of chemical substances, we look forward to future research findings about 888721-65-1.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; WO2009/136663; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem