Tag: M.W=400-500

Reference of 914942-88-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 914942-88-4, name is tert-Butyl (6-amino-7-iodo-1-methyl-1H-imidazo[4,5-c]pyridin-4-yl)(methyl)carbamate. A new synthetic method of this compound is introduced below.

A1.12 (201 mg, 0.5 mmol), bis(triphenyiphosphine) palladium dichloride (21mg, 0.03 mmol), 3-bromophenylacetylene (113 mg, 0.65 mmol) copper iodide EPO W(4.3mg, 0,025 mmol) and diisopropylethylamine (0.2mL 1.5 mmol) were suspended in DMF (2.5mL) and degassed by bubbling a stream of nitrogen through the reaction for several minutes. The reaction was then heated to 75 0C for 30 minutes and was concentrated and purified by silica gel chromatography (hexane/ethylacetate gradient) to yield A75.1. (281 mg 123%) LCMS: RT = 3.47min M+H+ = 458.19. The material was used in the next step without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,914942-88-4, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2006/122137; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1142363-52-7, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1142363-52-7, name is JNJ-40346527, molecular formula is C27H35N5O2, molecular weight is 461.5991, as common compound, the synthetic route is as follows.

Example 25 4-Cyano-1H-imidazole-2-carboxylic acid[2-(4,4-dimethyl-cyclohex-1-enyl)-6-(2,2,6,6-tetramethyl-tetrahydro-pyran-4-yl)-pyridin-3-yl]-amide(1S)-(+)-10-camphorsulfonic acid salt A solution of 4-cyano-1H-imidazole-2-carboxylic acid[2-(4,4-dimethyl-cyclohex-1-enyl)-6-(2,2,6,6-tetramethyl-tetrahydro-pyran-4-yl)-pyridin-3-yl]-amide (52.4 mg, 0.113 mmol, as prepared in Example 15, step (h)) in EtOH (2 mL) was treated with (1S)-(+)-10-camphorsulfonic acid (26.4 mg, 0.113 mmol) at room temperature for 1 h. The solvents were evaporated in vacuo, and the residue was dried under high vacuum overnight. The solid was dissolved in a minimum amount of EtOH (1 mL) with sonication and heating. While warm, the solution was slowly treated with hexanes until first precipitate was seen at the surface of the solution. The mixture was allowed to stir 30 min at room temperature while material continued to precipitate. The solid was filtered and air-dried to afford the title compound (66.2 mg, 84%) as white crystals. 1H-NMR (CD3OD; 400 MHz): delta 9.17 (d, 1H, J=8.4 Hz), 8.10 (s, 1H), 7.95 (d, 1H, J=8.4 Hz), 6.39-6.32 (m, 1H), 3.76-3.64 (m, 1H), 3.38-3.34 (m, 2H), 2.80-2.75 (m, 1H), 2.75-2.65 (m, 1H), 2.54-2.45 (m, 2H), 2.40-2.30 (m, 1H), 2.25-2.18 (m, 2H), 2.10-2.00 (m, 2H), 1.98-1.86 (m, 3H), 1.76-1.66 (m, 4H), 1.65-1.56 (m, 1H), 1.47-1.38 (m, 7H), 1.30 (s, 6H), 1.15 (m, 9H), 0.87 (s, 3H). Mass spectrum (APCI, m/z): Calcd. for C27H35N5O2, 462.3 (M+H), found 462.3.

The chemical industry reduces the impact on the environment during synthesis 1142363-52-7, I believe this compound will play a more active role in future production and life.

Reference:
Patent; Illig, Carl R.; Chen, Jinsheng; Meegalia, Sanath K.; Wall, Mark J.; US2009/105296; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 940943-37-3, S-(2-(6-(4-(3-(Dimethylamino)propoxy)phenylsulfonamido)pyridin-3-yl)-2-oxoethyl) ethanethioate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Product Details of 940943-37-3, blongs to pyridine-derivatives compound. Product Details of 940943-37-3

[0200] A 1 : 1 mixture of Compound 1 (0.3006 g) and L-malic acid (0.0893 g) was dissolved in 10 mL methanol at 70 0C. Oil formed upon cooling to ambient temperature. Seeds (Malate A) were added and the sample was stirred, overnight, at ambient temperature. Light yellow solids were observed and obtained by vacuum filtration. The solids were left to air dry overnight (0.2803 g; yield 72%, based on unsolvated weight).

The synthetic route of 940943-37-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KALYPSYS, INC.; WO2008/73733; (2008); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 914942-88-4, Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 914942-88-4, name is tert-Butyl (6-amino-7-iodo-1-methyl-1H-imidazo[4,5-c]pyridin-4-yl)(methyl)carbamate. A new synthetic method of this compound is introduced below.

A1.12 (201 mg, 0.5 mmol), bis(triphenyiphosphine) palladium dichloride (21mg, 0.03 mmol), 3-bromophenylacetylene (113 mg, 0.65 mmol) copper iodide EPO W(4.3mg, 0,025 mmol) and diisopropylethylamine (0.2mL 1.5 mmol) were suspended in DMF (2.5mL) and degassed by bubbling a stream of nitrogen through the reaction for several minutes. The reaction was then heated to 75 0C for 30 minutes and was concentrated and purified by silica gel chromatography (hexane/ethylacetate gradient) to yield A75.1. (281 mg 123%) LCMS: RT = 3.47min M+H+ = 458.19. The material was used in the next step without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,914942-88-4, its application will become more common.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2006/122137; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Electric Literature of 1142363-52-7, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1142363-52-7, name is JNJ-40346527, molecular formula is C27H35N5O2, molecular weight is 461.5991, as common compound, the synthetic route is as follows.

Example 25 4-Cyano-1H-imidazole-2-carboxylic acid[2-(4,4-dimethyl-cyclohex-1-enyl)-6-(2,2,6,6-tetramethyl-tetrahydro-pyran-4-yl)-pyridin-3-yl]-amide(1S)-(+)-10-camphorsulfonic acid salt A solution of 4-cyano-1H-imidazole-2-carboxylic acid[2-(4,4-dimethyl-cyclohex-1-enyl)-6-(2,2,6,6-tetramethyl-tetrahydro-pyran-4-yl)-pyridin-3-yl]-amide (52.4 mg, 0.113 mmol, as prepared in Example 15, step (h)) in EtOH (2 mL) was treated with (1S)-(+)-10-camphorsulfonic acid (26.4 mg, 0.113 mmol) at room temperature for 1 h. The solvents were evaporated in vacuo, and the residue was dried under high vacuum overnight. The solid was dissolved in a minimum amount of EtOH (1 mL) with sonication and heating. While warm, the solution was slowly treated with hexanes until first precipitate was seen at the surface of the solution. The mixture was allowed to stir 30 min at room temperature while material continued to precipitate. The solid was filtered and air-dried to afford the title compound (66.2 mg, 84%) as white crystals. 1H-NMR (CD3OD; 400 MHz): delta 9.17 (d, 1H, J=8.4 Hz), 8.10 (s, 1H), 7.95 (d, 1H, J=8.4 Hz), 6.39-6.32 (m, 1H), 3.76-3.64 (m, 1H), 3.38-3.34 (m, 2H), 2.80-2.75 (m, 1H), 2.75-2.65 (m, 1H), 2.54-2.45 (m, 2H), 2.40-2.30 (m, 1H), 2.25-2.18 (m, 2H), 2.10-2.00 (m, 2H), 1.98-1.86 (m, 3H), 1.76-1.66 (m, 4H), 1.65-1.56 (m, 1H), 1.47-1.38 (m, 7H), 1.30 (s, 6H), 1.15 (m, 9H), 0.87 (s, 3H). Mass spectrum (APCI, m/z): Calcd. for C27H35N5O2, 462.3 (M+H), found 462.3.

The chemical industry reduces the impact on the environment during synthesis 1142363-52-7, I believe this compound will play a more active role in future production and life.

Reference:
Patent; Illig, Carl R.; Chen, Jinsheng; Meegalia, Sanath K.; Wall, Mark J.; US2009/105296; (2009); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Adding a certain compound to certain chemical reactions, such as: 940943-37-3, S-(2-(6-(4-(3-(Dimethylamino)propoxy)phenylsulfonamido)pyridin-3-yl)-2-oxoethyl) ethanethioate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Product Details of 940943-37-3, blongs to pyridine-derivatives compound. Product Details of 940943-37-3

[0200] A 1 : 1 mixture of Compound 1 (0.3006 g) and L-malic acid (0.0893 g) was dissolved in 10 mL methanol at 70 0C. Oil formed upon cooling to ambient temperature. Seeds (Malate A) were added and the sample was stirred, overnight, at ambient temperature. Light yellow solids were observed and obtained by vacuum filtration. The solids were left to air dry overnight (0.2803 g; yield 72%, based on unsolvated weight).

The synthetic route of 940943-37-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KALYPSYS, INC.; WO2008/73733; (2008); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Reference of 1151989-04-6 ,Some common heterocyclic compound, 1151989-04-6, molecular formula is C19H14N2O5S2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Synthesis of Compound 11:Aleclon hemifumarate (121 mg, 0.22 mmol, 1 eq) at room temperature in the darkDissolved in dry dimethylformamide (4 mL),Triethylamine (34 mg, 46 muL, 0.33 mmol, 1.5 eq) was added slowlyStir for half an hour,Compound 8 (95 mg, 0.23 mmol, 1.05 eq) and then slowly addedTrace of 4-dimethylaminopyridine in dimethylformamide(2mL) solution,The mixture was stirred at room temperature under an argon atmosphere overnight. The solvent is removed under reduced pressure and subjected to rapid preparative column chromatography.One-step purification (methanol: methylene chloride, 1/50 to 1/10 v/v) afforded white solid (yield: 67 mg, 37%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,1151989-04-6, its application will become more common.

Reference:
Patent; Fudan University; Sun Tao; Jiang Chen; (22 pag.)CN109846824; (2019); A;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1220910-89-3, name is Benzyl (3-fluoro-4-(6-(2-methyl-2H-tetrazol-5-yl)pyridin-3-yl)phenyl)carbamate, molecular formula is C21H17FN6O2, molecular weight is 404.4, as common compound, the synthetic route is as follows.Recommanded Product: Benzyl (3-fluoro-4-(6-(2-methyl-2H-tetrazol-5-yl)pyridin-3-yl)phenyl)carbamate

A 5-L, three-neck, round-bottom flask was equipped with an overhead stirrer, a thermocouple, a 500-mL addition funnel and a nitrogen-inlet adapter. The flask was dried with a heat gun under a flow of nitrogen to an internal temperature of 60C. The flask was charged with intermediate 7 (110.0 g, 0.272 mol, AMRI lot No. DUG-AF-202Q)) and anhydrous THF (2.2 L, 20 vol). The slurry was stirred and a light green solution formed. The addition funnel was charged with 1.0 M lithium hexamethyldisilazide (299 mL, 0.286 mol, 1.05 eq.). The LiHMDS solution was added dropwise to the solution of intermediate 7 over approximately 25 minutes. A red solution formed. The solution was stirred one hour at room temperature and then DMPU (34.9 g, 0.272 mol, 1 eq) was added, and the mixture turned to a yellow slurry. The batch was cooled in an ice bath to 5.7C. R-(-)-Glycidyl butyrate (41.25 g, 0.286 mol, 1.05 eq) was then added in one portion. The mixture was stirred in the ice bath for 0.5 hour and then was warmed to room temperature and stirred overnight. The reaction formed a tan slurry at this point, and HPLC analysis after 15 hours indicated that there was approximately 87% TR-700, 1.6% intermediate 7, and approximately 7% of the butyrate ester of TR-700. A small amount of sodium methoxide in methanol (11 mL, 0.1 vol) was added, and the batch was stirred for 1 hour to remove the residual ester. The in-process HPLC analysis at this point showed there was approximately 90.7% TR-700 and 0.2% of the butyrate ester. The reaction was quenched by the addition of 10% w/w ammonium chloride solution (1.1 L, 10 vol). A modest exothermic event from 22C to 25C was observed upon addition of the ammonium chloride solution. The two-phase mixture was distilled to a pot temperature of 700C (atmospheric pressure) to remove approximately 2.2 L of the THF. This formed a thick slurry which is diluted with water (550 mL, 5 volumes). The slurry was cooled to room temperature (23.6C) and was filtered. The filter cake was washed with water (1.1 L, 10 vol) and methanol (550 mL, 5 vol) to give TR-700 as a white solid. The wet cake was dried overnight in a vacuum oven at 500C to give 89.7 g of TR-700 (89% yield) that was 97.8% (AUC) by HPLC analysis. The TR-700 was further purified by reslurrying in 2.7 L (30 vol) of 4: 1 methanol/water at 700C, cooling to 230C, filtering and washing with methanol (180 ml). This removed some of the over-alkylated product that is observed. The purified TR- 700 was recovered in 96% yield (85% overall yield), and the purity was improved to 98.4% (AUC) by HPLC analysis. The palladium content was 10 ppm.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1220910-89-3, Benzyl (3-fluoro-4-(6-(2-methyl-2H-tetrazol-5-yl)pyridin-3-yl)phenyl)carbamate, and friends who are interested can also refer to it.

Reference:
Patent; TRIUS THERAPEUTICS; COSTELLO, Carrie, A.; SIMSON, Jaqueline, A.; DUGUID, Robert, J.; PHILLIPSON, Douglas; WO2010/42887; (2010); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

Synthetic Route of 914942-88-4 ,Some common heterocyclic compound, 914942-88-4, molecular formula is C13H18IN5O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Copper iodide (5.0mg, 0.025mmol) and dichlorobis(triphenylphosphine) palladium (4.0mg, 0.050mmol) were each added in one portion to a mixture of Al.12 (lOOmg, 0.25mmol), phenylacetylene (28mg, 0.28mmol) and triethylamine (0.11ml, 0.75mmol) in dichloromethane (0.5ml) at room temperature under a nitrogen atmosphere. The resulting mixture was heated to 40 0C for 24hrs before cooling to room temperature and evaporating in vacuo. The residue was purified by column chromatography using ethyl acetate as eluent to give 62mg of A1.13. LC/MS Phenomenex S5 4.6x30mm (2min gradient) Found: M+H = 378.27 at 1.51 min

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 914942-88-4, tert-Butyl (6-amino-7-iodo-1-methyl-1H-imidazo[4,5-c]pyridin-4-yl)(methyl)carbamate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2006/122137; (2006); A1;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem

With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.1220910-89-3, name is Benzyl (3-fluoro-4-(6-(2-methyl-2H-tetrazol-5-yl)pyridin-3-yl)phenyl)carbamate, molecular formula is C21H17FN6O2, molecular weight is 404.4, as common compound, the synthetic route is as follows.Recommanded Product: Benzyl (3-fluoro-4-(6-(2-methyl-2H-tetrazol-5-yl)pyridin-3-yl)phenyl)carbamate

A 5-L, three-neck, round-bottom flask was equipped with an overhead stirrer, a thermocouple, a 500-mL addition funnel and a nitrogen-inlet adapter. The flask was dried with a heat gun under a flow of nitrogen to an internal temperature of 60C. The flask was charged with intermediate 7 (110.0 g, 0.272 mol, AMRI lot No. DUG-AF-202Q)) and anhydrous THF (2.2 L, 20 vol). The slurry was stirred and a light green solution formed. The addition funnel was charged with 1.0 M lithium hexamethyldisilazide (299 mL, 0.286 mol, 1.05 eq.). The LiHMDS solution was added dropwise to the solution of intermediate 7 over approximately 25 minutes. A red solution formed. The solution was stirred one hour at room temperature and then DMPU (34.9 g, 0.272 mol, 1 eq) was added, and the mixture turned to a yellow slurry. The batch was cooled in an ice bath to 5.7C. R-(-)-Glycidyl butyrate (41.25 g, 0.286 mol, 1.05 eq) was then added in one portion. The mixture was stirred in the ice bath for 0.5 hour and then was warmed to room temperature and stirred overnight. The reaction formed a tan slurry at this point, and HPLC analysis after 15 hours indicated that there was approximately 87% TR-700, 1.6% intermediate 7, and approximately 7% of the butyrate ester of TR-700. A small amount of sodium methoxide in methanol (11 mL, 0.1 vol) was added, and the batch was stirred for 1 hour to remove the residual ester. The in-process HPLC analysis at this point showed there was approximately 90.7% TR-700 and 0.2% of the butyrate ester. The reaction was quenched by the addition of 10% w/w ammonium chloride solution (1.1 L, 10 vol). A modest exothermic event from 22C to 25C was observed upon addition of the ammonium chloride solution. The two-phase mixture was distilled to a pot temperature of 700C (atmospheric pressure) to remove approximately 2.2 L of the THF. This formed a thick slurry which is diluted with water (550 mL, 5 volumes). The slurry was cooled to room temperature (23.6C) and was filtered. The filter cake was washed with water (1.1 L, 10 vol) and methanol (550 mL, 5 vol) to give TR-700 as a white solid. The wet cake was dried overnight in a vacuum oven at 500C to give 89.7 g of TR-700 (89% yield) that was 97.8% (AUC) by HPLC analysis. The TR-700 was further purified by reslurrying in 2.7 L (30 vol) of 4: 1 methanol/water at 700C, cooling to 230C, filtering and washing with methanol (180 ml). This removed some of the over-alkylated product that is observed. The purified TR- 700 was recovered in 96% yield (85% overall yield), and the purity was improved to 98.4% (AUC) by HPLC analysis. The palladium content was 10 ppm.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,1220910-89-3, Benzyl (3-fluoro-4-(6-(2-methyl-2H-tetrazol-5-yl)pyridin-3-yl)phenyl)carbamate, and friends who are interested can also refer to it.

Reference:
Patent; TRIUS THERAPEUTICS; COSTELLO, Carrie, A.; SIMSON, Jaqueline, A.; DUGUID, Robert, J.; PHILLIPSON, Douglas; WO2010/42887; (2010); A2;,
Pyridine – Wikipedia,
Pyridine | C5H5N – PubChem